Addresable led strip WS2812 guide.

[KondratokGK]

I want to add WS2812 to my T20. How to add PWM pin to device configuration or something like that.

[pfeerick]

You would need to add a code block similar to this, but for the RADIO_T20, and would need to configure it appropriately for that target. i.e. you need a suitable free GPIO, Timer, and DMA handler. After that, the rest of the code should pretty much automatically work, as it is looking for LED_STRIP_GPIO to be defined to enable the rest of the necessary support.

edgetx/radio/src/targets/taranis/hal.h

Lines 2046 to 2059 in e303b12

	#if defined(RADIO_MT12)
	#define LED_STRIP_LENGTH 7
	#define LED_STRIP_GPIO GPIO_PIN(GPIOA, 8) // PA.08 / TIM1_CH1
	#define LED_STRIP_GPIO_AF LL_GPIO_AF_1 // TIM1 / TIM2
	#define LED_STRIP_TIMER TIM1
	#define LED_STRIP_TIMER_FREQ (PERI2_FREQUENCY * TIMER_MULT_APB2)
	#define LED_STRIP_TIMER_CHANNEL LL_TIM_CHANNEL_CH1
	#define LED_STRIP_TIMER_DMA DMA2
	#define LED_STRIP_TIMER_DMA_CHANNEL LL_DMA_CHANNEL_6
	#define LED_STRIP_TIMER_DMA_STREAM LL_DMA_STREAM_5
	#define LED_STRIP_TIMER_DMA_IRQn DMA2_Stream5_IRQn
	#define LED_STRIP_TIMER_DMA_IRQHandler DMA2_Stream5_IRQHandler
	#define LED_STRIP_REFRESH_PERIOD 50 //ms
	#elif defined(RADIO_T14) || defined(RADIO_V14) || defined(RADIO_V12)