diff --git a/companion/src/firmwares/customfunctiondata.cpp b/companion/src/firmwares/customfunctiondata.cpp index 0518bfda00a..ddefa941941 100644 --- a/companion/src/firmwares/customfunctiondata.cpp +++ b/companion/src/firmwares/customfunctiondata.cpp @@ -300,7 +300,7 @@ QString CustomFunctionData::resetToString(const int value, const ModelData * mod } if (value < ++step) - return tr("Flight"); + return tr("Session"); if (value < ++step) return tr("Telemetry"); diff --git a/companion/src/translations/companion_cs.ts b/companion/src/translations/companion_cs.ts index c6226fd4756..ff04b572912 100644 --- a/companion/src/translations/companion_cs.ts +++ b/companion/src/translations/companion_cs.ts @@ -2243,6 +2243,11 @@ Do you want to import settings from a file? %1s + + + Session + + Trims @@ -2428,11 +2433,6 @@ Do you want to import settings from a file? Bind Ext. Module Bind ext. modulu - - - Flight - Let - Telemetry @@ -8419,46 +8419,46 @@ Do you wish to continue? MdiChild - + Editing model %1: Editace modelu %1: - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Unable to find file %1! Nemohu nalézt soubor %1! - + Error opening file %1: %2. Chyba při otevírání souboru %1: %2. - + Error reading file %1: %2. Chyba při otevírání souboru %1: %2. - + Save As Uložit jako @@ -8580,7 +8580,7 @@ Do you wish to continue? - + Insert Vložit @@ -8617,83 +8617,83 @@ Do you wish to continue? - + Unable to Edit Radio Settings whilst models are open for editing. - - + + Invalid file extension! - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit Úpravy - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -8773,17 +8773,17 @@ Do you wish to continue? Nelze vložit model, poslední model v seznamu by byl smazán. - + Cannot add model, could not find an available model slot. Nelze přidat model, nelze najít dostupný volný slot. - + Cannot paste model, out of available model slots. Model nelze vložit, není dostupný volný slot. - + Delete %n selected model(s)? Odstranit %n vybraný model? @@ -8792,52 +8792,52 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. Nelze duplikovat model, nelze najít dostupný volný slot. - + Favorites - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Models status - + No errors - + Errors - + Open backup Models and Settings file Otevřít zálohu modelů a nastavení rádia @@ -8883,34 +8883,34 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Do you want to overwrite radio general settings? Chcete přepsat obecná nastavení rádia? - + %1 has been modified. Do you want to save your changes? %1 byl upraven. Chcete změny uložit? - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Invalid binary backup File %1 Neplatný binární soubor zálohy %1 @@ -9458,140 +9458,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source Stopa plynu - + THR Plyn - + TH - + OFF Vypnuto - + Master/Jack Učitel/Jack konektor - + Slave/Jack Žák/Jack konektor - + Master/SBUS Module Učitel/SBUS modul - + Master/CPPM Module Učitel/CPPM modul - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global Globální - + SW - - + + Off Vypnuto - + --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10399,27 +10399,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index - + Name Název - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. @@ -10695,292 +10695,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port Port Trenér - + Internal Radio System Interní vysílací modul - + External Radio Module Externí vysílací modul - + Extra Radio System Extra modul - + Radio System Vysílací modul - + OFF Vypnuto - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch Spínač @@ -17901,14 +17901,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_da.ts b/companion/src/translations/companion_da.ts index 9604c57480a..c6653aef3ae 100644 --- a/companion/src/translations/companion_da.ts +++ b/companion/src/translations/companion_da.ts @@ -2235,11 +2235,6 @@ Vil du indlæse indstillinger fra en fil? Push Custom Switch %1 Tryk tilpasset kontakt %1 - - - Flight - Flyvning - Telemetry @@ -2250,6 +2245,11 @@ Vil du indlæse indstillinger fra en fil? s s + + + Session + + Trims @@ -6436,7 +6436,7 @@ Er du sikker? Prec - + Præcision @@ -8445,63 +8445,63 @@ Vil du fortsætte? MdiChild - + Editing model %1: Rediger model %1: - + Unable to find SD card! Kan ikke finde SD kort! - + Models and settings written Model og indstillinger gemt - + Error writing models and settings! Fejl ved gem af model og indstillinger! - + Unable to find file %1! Kan ikke finde fil %1 ! - + Error reading file %1: %2. Fejl ved indlæsning af fil %1: %2. - + Error opening file %1: %2. Fejl ved åbning af fil %1: %2. - + Save As Gem som - + %1 has been modified. Do you want to save your changes? %1 er ændret. Vil du gemme ændringer? - + Open backup Models and Settings file Åbn model- og indstillings fil - + Invalid binary backup File %1 Binær sikkerhedskopi er ugyldig %1 @@ -8517,7 +8517,7 @@ Vil du gemme ændringer? Alt+S - + Do you want to overwrite radio general settings? Vil du overskrive de generelle indstillinger? @@ -8611,7 +8611,7 @@ Vil du gemme ændringer? - + Insert Indsæt @@ -8706,17 +8706,17 @@ Vil du gemme ændringer? Kan ikke oprette endnu en model, siste model i listen ville blive slettet. - + Cannot add model, could not find an available model slot. Kan ikke oprette endnu en model, ikke mere plads til modeller. - + Cannot paste model, out of available model slots. Kan ikke indsætte model, ikke mere plads til modeller. - + Delete %n selected model(s)? Slet %n valgte model? @@ -8724,47 +8724,47 @@ Vil du gemme ændringer? - + Cannot duplicate model, could not find an available model slot. Ikke muligt at duplikere model, ikke mere plads til modeller. - + Do you wish to continue with the conversion? Vil du gennemføre konvertering? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. Vælg <i>Anvend</i> for at konvertere;i>Luk</i> for at afbryde uden at konvertere. - + <b>The conversion generated some important messages, please review them below.</b> <b>Konverteringen har vigtige meddelser, se nedenfor.</b> - + Companion :: Conversion Result for %1 Companion :: Resultat fra konvertering af %1 - + Models status Model status - + No errors Ingen fejl - + Errors Fejl - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> <p><b>Gældende radiotype (%1) er ikke kompatibel med fil %3 (fra %2), modeller og indstillinger skal konverteres.</b></p> @@ -8774,37 +8774,37 @@ Vil du gemme ændringer? kun læsning - + Unable to Edit Radio Settings whilst models are open for editing. Radioindstillinger kan ikke ændres. mens modeller redigeres. - + Select a model template file Vælg en model template - + Add a new model using Tilføj en model som anvender - + Defaults Standard valg - + Edit Rediger - + Wizard Guide - + Failed to remove temporary model! Den temporære model kan ikke slettes! @@ -8831,32 +8831,32 @@ Vil du gemme ændringer? Eksporter model - + Model already exists! Do you want to overwrite it or insert into a new slot? Model findes allerede! Ønsker du at overskrive eller vælge ny plads? - + Overwrite Overskriv - + Favorites Favoritter - + Internal module protocol changed to <b>OFF</b> for %1 models! Protokol for interne modul er ændret til <b>FRA</b> for %1 modeller! - + Template Skabelon - + Export model Eksporter model @@ -8906,33 +8906,33 @@ Vil du gemme ændringer? Vis værktøjer for labels - - + + Invalid file extension! Ugyldig fil efternavn! - + Write Models and Settings Gem model og indstillinger - + Operation aborted as %1 models have significant errors that may affect model operation. Handling afbrudt da %1 modeller har alvorlige fejl som kan påvirke model funktionalitet. - + You are about to overwrite ALL models. Du er ved at overskrive ALLE modeller. - + Continue? Fortsæt? - + Do not show this message again Vis ikke denne meddelelse igen @@ -9480,140 +9480,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: Model: - + Throttle Source Gas kanal - + THR GAS - + TH - + OFF FRA - + Master/Jack Træner/stik - + Slave/Jack Elev/stik - + Master/SBUS Module Træner/SBUS-modul - + Master/CPPM Module Træner/CPPM-modul - + Master/Serial Træner/Seriel - + Master/Bluetooth Træner/bluetooth - + Slave/Bluetooth Elev/bluetooth - + Master/Multi Træner/Multi - + Master/CRSF Træner/CRSF - + NONE INGEN - + TOGGLE Skifter - + 2POS 2 positioner - + Global Global - + SW SW - - + + Off Fra - + --- - + Group Gruppe - + On Til - + Error - Input %1 Line %2 %3 Fejl - Indgang %1 linje %2 %3 - - + + has no source har ingen kilde - + Error - Mix %1 Line %2 %3 Fejl - Mix %1 linje %2 %3 - - + + Restore Genskab @@ -10421,27 +10421,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index Indeks - + Name Navn - + RX # Modtager # - + Labels Label - + Model %1 Translators: do NOT use accents here, this is a default model name. Model %1 @@ -10712,115 +10712,115 @@ p, li { white-space: pre-wrap; } Negativ - + Trainer Port Træner indgang - + Internal Radio System Intern sender - + External Radio Module Ekstern sender - + Extra Radio System Ekstra sende system - + Radio System Radio system - + Flysky AFHDS2A - + Flysky AFHDS3 - + 10mW - 16CH 10mW - 16KA - - + + 100mW - 16CH 100mW - 16KA - + 500mW - 16CH 500mW - 16KA - + Auto <= 1W - 16CH Auto <= 1W - 16KA - - + + 25mW - 8CH 25mW - 8KA - - + + 25mW - 16CH 25mW - 16KA - + 200mW - 16CH (no telemetry) 200mW - 16KA (ingen telemetri) - + 500mW - 16CH (no telemetry) 500mW - 16KA (ingen telemetri) - + 100mW - 16CH (no telemetry) 100mW - 16KA (ingen telemetri) - + 25 mW 25 mW - + 100 mW 100 mW - + 500 mW 500 mW - + 1 W 1 W - + 2 W 2 W - + OFF FRA @@ -10830,179 +10830,179 @@ p, li { white-space: pre-wrap; } Aktuel firmware er ikke kompatibel med hardware - - + + SPort - + PPM PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat SBUS via VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Ghost - + Lemon-Rx DSMP - + CH5 KA5 - + Switch Kontakt - - + + No Telemetry Ingen telemetri - + MLink MLink @@ -16345,7 +16345,7 @@ Tidstempel Write Firmware to Radio - + Skriv firmware til radio @@ -16608,7 +16608,7 @@ Tidstempel Write Firmware to Radio - + Skriv firmware til radio @@ -17972,14 +17972,14 @@ Vil du fortsætte? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings Indlæser radio indstillinger diff --git a/companion/src/translations/companion_de.ts b/companion/src/translations/companion_de.ts index c7b92a8d595..72d1ff6be64 100644 --- a/companion/src/translations/companion_de.ts +++ b/companion/src/translations/companion_de.ts @@ -2248,6 +2248,11 @@ Do you want to import settings from a file? %1s %1s + + + Session + + Trims @@ -2433,11 +2438,6 @@ Do you want to import settings from a file? Bind Ext. Module Binden Ext. Modul - - - Flight - Flug - Telemetry @@ -8428,7 +8428,7 @@ Do you wish to continue? MdiChild - + Editing model %1: Modell %1 bearbeiten : @@ -8474,67 +8474,67 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Do you want to overwrite radio general settings? Wollen sie wirklich die Sender Grundeinstellungen überschreiben? - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Unable to find file %1! Kann die Datei %1 nicht finden ! - + Save As Speichern unter @@ -8654,7 +8654,7 @@ Do you wish to continue? - + Insert Einfügen @@ -8690,58 +8690,58 @@ Do you wish to continue? - - + + Invalid file extension! - + Do not show this message again - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit Bearbeiten - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -8821,17 +8821,17 @@ Do you wish to continue? - + Cannot add model, could not find an available model slot. - + Cannot paste model, out of available model slots. - + Delete %n selected model(s)? @@ -8839,83 +8839,83 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. - + Favorites - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Models status - + No errors - + Errors - + Open backup Models and Settings file Öffne Backup Modelle-und Einstellungs Datei - + Error opening file %1: %2. Fehler beim Öffnen der Datei %1: %2. - + Error reading file %1: %2. Fehler beim Lesen der Datei%1: %2. - + %1 has been modified. Do you want to save your changes? %1 wurde verändert. Sollen die Änderungen gespeichert werden? - + Unable to Edit Radio Settings whilst models are open for editing. - + Invalid binary backup File %1 Ungültige Binär Backup Datei %1 @@ -9464,140 +9464,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: Modell: - + Throttle Source Gas-Quelle - + THR Gas - + TH - + OFF AUS - + Master/Jack Lehrer/Buchse - + Slave/Jack Schüler/Buchse - + Master/SBUS Module Lehrer/SBus Module - + Master/CPPM Module Lehrer/CPPM Module - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global Global - + SW SW - - + + Off Aus - + --- --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10405,27 +10405,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index Index - + Name Name - + RX # RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. Modell %1 @@ -10701,292 +10701,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port Trainer Port - + Internal Radio System Internes HF Modul - + External Radio Module Externes HF Modul - + Extra Radio System - + Radio System Sender System - + OFF AUS - + PPM PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch Schalter @@ -17926,14 +17926,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_en.ts b/companion/src/translations/companion_en.ts index 768df9f66d4..849539d0712 100644 --- a/companion/src/translations/companion_en.ts +++ b/companion/src/translations/companion_en.ts @@ -2222,6 +2222,11 @@ Do you want to import settings from a file? %1s + + + Session + + Trims @@ -2407,11 +2412,6 @@ Do you want to import settings from a file? Bind Ext. Module - - - Flight - - Telemetry @@ -8361,22 +8361,22 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Unable to Edit Radio Settings whilst models are open for editing. - + Delete %n selected model(s)? Delete %n selected model? @@ -8515,17 +8515,17 @@ Do you wish to continue? - + Cannot paste model, out of available model slots. - + Do you want to overwrite radio general settings? - + Cannot add model, could not find an available model slot. @@ -8577,52 +8577,52 @@ Do you wish to continue? - + Insert - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -8706,141 +8706,141 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. - + Editing model %1: - + Favorites - + Save As - - + + Invalid file extension! - + %1 has been modified. Do you want to save your changes? - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Models status - + No errors - + Errors - + Open backup Models and Settings file - + Unable to find file %1! - + Error opening file %1: %2. - + Error reading file %1: %2. - + Invalid binary backup File %1 @@ -9378,140 +9378,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source - + THR - + TH - + OFF - + Master/Jack - + Slave/Jack - + Master/SBUS Module - + Master/CPPM Module - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global - + SW - - + + Off - + --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10319,27 +10319,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index - + Name - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. @@ -10615,292 +10615,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port - + Internal Radio System - + External Radio Module - + Extra Radio System - + Radio System - + OFF - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch Switch @@ -17811,14 +17811,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_es.ts b/companion/src/translations/companion_es.ts index 6f9493baace..e9f98313b13 100644 --- a/companion/src/translations/companion_es.ts +++ b/companion/src/translations/companion_es.ts @@ -2246,6 +2246,11 @@ Do you want to import settings from a file? %1s + + + Session + + Trims @@ -2431,11 +2436,6 @@ Do you want to import settings from a file? Bind Ext. Module Bind módulo externo - - - Flight - Vuelo - Telemetry @@ -8445,7 +8445,7 @@ Do you wish to continue? MdiChild - + Editing model %1: Editando modelo %1: @@ -8486,67 +8486,67 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Do you want to overwrite radio general settings? ¿Quieres sobreescribir los ajustes generales de la radio? - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> ><p><b>El tipo actualmente seleccionado de radio (%1) no es compatible con el archivo %3 (de %2), los modelos y ajustes necesitan ser convertidos.</b></p> - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Unable to find file %1! ¡No se puede encontrar el archivo %1! - + Error reading file %1: %2. Error leyendo el archivo %1: @@ -8668,7 +8668,7 @@ Do you wish to continue? - + Insert Insertar @@ -8704,58 +8704,58 @@ Do you wish to continue? - - + + Invalid file extension! - + Do not show this message again - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit Editar - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -8840,17 +8840,17 @@ Do you wish to continue? No se puede insertar el modelo, no hay slots de modelo disponibles. - + Cannot add model, could not find an available model slot. No se puede añadir el modelo, no hay slots de modelo disponibles. - + Cannot paste model, out of available model slots. No se puede pegar el modelo, no hay slots de modelo disponibles. - + Delete %n selected model(s)? ¿Borrar %n modelo seleccionado? @@ -8858,81 +8858,81 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. No se puede duplicar el modelo, no hay un slot de modelo disponibles. - + Favorites - + Do you wish to continue with the conversion? ¿Quieres continuar la conversión? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. Elige <i>Aplicar</i> para convertir el archivo, o <i>Cerrar</i> para cerrar sin conversión. - + <b>The conversion generated some important messages, please review them below.</b> <b>La conversión ha generado mensajes importantes, por favor revísalos.</b> - + Companion :: Conversion Result for %1 Companion :: Resultado de la conversión para %1 - + Models status - + No errors - + Errors - + Error opening file %1: %2. Error abriendo el archivo %1: %2. - + Save As Guardar como - + Unable to Edit Radio Settings whilst models are open for editing. - + Open backup Models and Settings file Abre archivo de copia de seguridad de modelos y ajustes - + %1 has been modified. Do you want to save your changes? %1 ha sido modificado. ¿Quieres guardar los cambios? - + Invalid binary backup File %1 Archivo binariode copia de seguridad no válido %1 @@ -9470,140 +9470,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: Modelo: - + Throttle Source Fuente del acelerador - + THR - + TH - + OFF APAGADO - + Master/Jack Master/Jack - + Slave/Jack Slave/Jack - + Master/SBUS Module Módulo Master/SBUS - + Master/CPPM Module Módulo Master/CPPM - + Master/Serial - + Master/Bluetooth Master/Bluetooth - + Slave/Bluetooth Slave/Bluetooth - + Master/Multi Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global - + SW - - + + Off Apagado - + --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10411,27 +10411,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index Índice - + Name Nombre - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. Modelo %1 @@ -10707,292 +10707,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port Puerto entrenador - + Internal Radio System Sistema de radio interno - + External Radio Module Módulo externo de radio - + Extra Radio System Sistema de radio extra - + Radio System Sistema de radio - + OFF APAGADO - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) 200mW - 16CH (sin telemetría) - + 500mW - 16CH (no telemetry) 500mW - 16CH (sin telemetría) - + 100mW - 16CH (no telemetry) 100mW - 16CH (sin telemetría) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch @@ -17937,14 +17937,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_fi.ts b/companion/src/translations/companion_fi.ts index f38fda2f255..fcde9bed83f 100644 --- a/companion/src/translations/companion_fi.ts +++ b/companion/src/translations/companion_fi.ts @@ -2244,6 +2244,11 @@ Do you want to import settings from a file? %1s %1s + + + Session + + Trims @@ -2429,11 +2434,6 @@ Do you want to import settings from a file? Bind Ext. Module - - - Flight - - Telemetry @@ -8471,86 +8471,86 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Do you want to overwrite radio general settings? Haluatko päällekirjoittaa radion yleiset asetukset ? - + Editing model %1: Muutetaan mallia %1: - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Unable to find file %1! Ei löydy tiedostoa %1! - + Error opening file %1: %2. Virhe avattaessa tiedostoa %1: %2. - + Error reading file %1: %2. Virhe luettaessa tiedostoa %1: %2. - + Save As Tallenna nimellä @@ -8670,7 +8670,7 @@ Do you wish to continue? - + Insert @@ -8706,63 +8706,63 @@ Do you wish to continue? - + Unable to Edit Radio Settings whilst models are open for editing. - - + + Invalid file extension! - + Do not show this message again - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit Muuta - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -8842,17 +8842,17 @@ Do you wish to continue? - + Cannot add model, could not find an available model slot. - + Cannot paste model, out of available model slots. - + Delete %n selected model(s)? @@ -8860,64 +8860,64 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. - + Favorites - + %1 has been modified. Do you want to save your changes? %1 on modifoitu. Haluatko tallentaa muutokset ? - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Models status - + No errors - + Errors - + Open backup Models and Settings file Avaa varmuuskopio mallit ja asetukset - + Invalid binary backup File %1 Väärää tietoa varmuuskopio tiedostossa %1 @@ -9455,140 +9455,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source Kaasun lähde - + THR KAA - + TH - + OFF Pois - + Master/Jack - + Slave/Jack - + Master/SBUS Module - + Master/CPPM Module - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global - + SW - - + + Off Pois - + --- --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10396,27 +10396,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index - + Name Nimi - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. @@ -10692,292 +10692,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port Trainerin portti - + Internal Radio System Sisäinen radio systeemi - + External Radio Module Ulkoinen radio systeemi - + Extra Radio System Extra Radio järjestelmä - + Radio System Radio systeemi - + OFF Pois - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch Kytkin @@ -17892,14 +17892,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_fr.ts b/companion/src/translations/companion_fr.ts index 85e0c88a2de..29947af4229 100644 --- a/companion/src/translations/companion_fr.ts +++ b/companion/src/translations/companion_fr.ts @@ -2245,6 +2245,11 @@ Voulez-vous importer les paramètres depuis un fichier ? %1s %1s + + + Session + + Trims @@ -2430,11 +2435,6 @@ Voulez-vous importer les paramètres depuis un fichier ? Repeat %1s Répéter %1s - - - Flight - Vol - Telemetry @@ -8440,12 +8440,12 @@ Do you wish to continue? MdiChild - + Unable to find file %1! Fichier %1 introuvable ! - + Save As Enregister Sous @@ -8570,7 +8570,7 @@ Do you wish to continue? - + Insert Insérer @@ -8675,17 +8675,17 @@ Do you wish to continue? Impossible d'insérer le modèle, le dernier modèle dans la liste serait supprimé. - + Cannot add model, could not find an available model slot. Impossible d'ajouter un modèle, aucun emplacement libre n’est disponible. - + Cannot paste model, out of available model slots. Impossible de coller le modèle, aucun emplacement libre n’est disponible. - + Delete %n selected model(s)? Supprimer le modèle sélectionné ? @@ -8693,93 +8693,93 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. Impossible de dupliquer le modèle, aucun emplacement libre n’est disponible. - - + + Invalid file extension! Extension de fichier invalide - + Do you wish to continue with the conversion? Souhaitez-vous vraiment lancer la conversion ? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. Choisissez <i>Appliquer</i> pour convertir le fichier ou <i>Annuler</i> pour le fermer sans conversion. - + <b>The conversion generated some important messages, please review them below.</b> <b>La conversion a généré des messages importants, veuillez les consulter ci-dessous.</b> - + Companion :: Conversion Result for %1 Companion :: Résultat de conversion de %1 - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Models status - + No errors - + Errors - + Editing model %1: Édition du modèle %1 : @@ -8815,79 +8815,79 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Unable to Edit Radio Settings whilst models are open for editing. - + Favorites - + Error reading file %1: %2. Fichier %1 corrompu: %2. - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit Édition - + Wizard - + Template Modèle - + Failed to remove temporary model! - + Export model - + Error opening file %1: %2. Erreur à l'ouverture du fichier %1: @@ -8905,27 +8905,27 @@ Do you wish to continue? - + Do you want to overwrite radio general settings? Voulez-vous vraiment écraser les paramètres généraux ? - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> <p><b>Le type de radio actuellement sélectionné (%1) n'est pas compatible avec le fichier %3 (à partir de %2), les modèles et les paramètres doivent être convertis.</b></p> - + Open backup Models and Settings file Ouvrir la sauvegarde de paramètres et modèles - + Invalid binary backup File %1 Fichier de sauvegarde %1 invalide - + %1 has been modified. Do you want to save your changes? %1 a été modifié. @@ -9475,140 +9475,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: Modèle: - + Throttle Source Source des gaz - + THR GAZ - + TH - + OFF Eteint - + Master/Jack Maître/Jack - + Slave/Jack Elève/Jack - + Master/SBUS Module Maître/SBUS module - + Master/CPPM Module Maître/CPPM Module - + Master/Serial - + Master/Bluetooth Maître/Bluetooth - + Slave/Bluetooth Elève/Bluetooth - + Master/Multi Maître/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global Global - + SW - - + + Off Aucun - + --- --- - + Group - + On Actif - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10416,27 +10416,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index - + Name Nom - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. Modele %1 @@ -10712,292 +10712,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port Port écolage - + Internal Radio System Module HF interne - + External Radio Module Module HF externe - + Extra Radio System Module HF supplémentaire - + Radio System Module HF - + OFF Eteint - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH 10mW - 16 VOIES - - + + 100mW - 16CH 100mW - 16 VOIES - + 500mW - 16CH 500mW - 16 VOIES - + Auto <= 1W - 16CH Auto <= 1W - 16 VOIES - - + + 25mW - 8CH 25mW - 8 VOIES - - + + 25mW - 16CH 25mW - 16 VOIES - + 200mW - 16CH (no telemetry) 200mW - 16 VOIES (pas de télémétrie) - + 500mW - 16CH (no telemetry) 500mW - 16 VOIES (pas de télémétrie) - + 100mW - 16CH (no telemetry) 100mW - 16 VOIES (pas de télémétrie) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch @@ -17943,14 +17943,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_he.ts b/companion/src/translations/companion_he.ts index d15dfc5c69e..06be484bdb0 100644 --- a/companion/src/translations/companion_he.ts +++ b/companion/src/translations/companion_he.ts @@ -2309,7 +2309,7 @@ Do you want to import settings from a file? - Flight + Session @@ -8471,7 +8471,7 @@ Do you wish to continue? - + Insert @@ -8623,37 +8623,37 @@ Do you wish to continue? - + Cannot add model, could not find an available model slot. - + Cannot paste model, out of available model slots. - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Do you want to overwrite radio general settings? - + Unable to Edit Radio Settings whilst models are open for editing. - + Delete %n selected model(s)? @@ -8661,186 +8661,186 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. - + Editing model %1: - + Favorites - - + + Invalid file extension! - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Models status - + No errors - + Errors - + Unable to find file %1! - + Error reading file %1: %2. - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit - + Wizard - + Template - + Failed to remove temporary model! - + Export model - + Error opening file %1: %2. - + Save As - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Open backup Models and Settings file - + %1 has been modified. Do you want to save your changes? - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Invalid binary backup File %1 @@ -9378,140 +9378,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source - + THR - + TH - + OFF - + Master/Jack - + Slave/Jack - + Master/SBUS Module - + Master/CPPM Module - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global גלובאלי - + SW - - + + Off - + --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10319,27 +10319,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index - + Name - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. @@ -10605,292 +10605,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port - + Internal Radio System - + External Radio Module - + Extra Radio System - + Radio System - + OFF - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 ערוץ 5 - + Switch Switch @@ -17811,14 +17811,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_it.ts b/companion/src/translations/companion_it.ts index 397dee68b8b..34e95b5b894 100644 --- a/companion/src/translations/companion_it.ts +++ b/companion/src/translations/companion_it.ts @@ -2241,6 +2241,11 @@ Do you want to import settings from a file? %1s %1s + + + Session + + Trims @@ -2426,11 +2431,6 @@ Do you want to import settings from a file? Bind Ext. Module - - - Flight - - Telemetry @@ -8425,51 +8425,51 @@ Do you wish to continue? MdiChild - + Editing model %1: Modifica modello %1: - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Unable to find file %1! Impossibile trovare il file %1! - + Error opening file %1: %2. Errore durante l'apertura del file %1: %2. - + Error reading file %1: %2. Error durante la lettura del file %1: %2. - + Save As Salva Come @@ -8589,7 +8589,7 @@ Do you wish to continue? - + Insert @@ -8625,83 +8625,83 @@ Do you wish to continue? - + Unable to Edit Radio Settings whilst models are open for editing. - - + + Invalid file extension! - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit Modifica - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -8781,17 +8781,17 @@ Do you wish to continue? - + Cannot add model, could not find an available model slot. - + Cannot paste model, out of available model slots. - + Delete %n selected model(s)? @@ -8799,62 +8799,62 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. - + Favorites - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Models status - + No errors - + Errors - + Open backup Models and Settings file Apri salvataggio modelli e impostazioni - + Invalid binary backup File %1 File di backup binario non valido %1 - + %1 has been modified. Do you want to save your changes? %1 è stato modificato. @@ -8902,17 +8902,17 @@ Salvare le modifiche ? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Do you want to overwrite radio general settings? Vuoi sovrascrivere le impostazioni generali della radio? @@ -9460,140 +9460,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source Sorgente motore - + THR MOT - + TH - + OFF Spento - + Master/Jack Maestro/(presa) - + Slave/Jack Allievo/(Presa) - + Master/SBUS Module Maestro/Modulo SBUS - + Master/CPPM Module Maestro/Modulo CPPM - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global Globale - + SW - - + + Off NO - + --- --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10401,27 +10401,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index - + Name Nome - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. @@ -10697,292 +10697,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port Porta Allievo - + Internal Radio System Sistema Radio interno - + External Radio Module Modulo radio Esterno - + Extra Radio System Sistema radio esteso - + Radio System Sistema Radio - + OFF Spento - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch Interruttore @@ -17898,14 +17898,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_ja.ts b/companion/src/translations/companion_ja.ts index e17927d5d91..85cc3ba7b43 100644 --- a/companion/src/translations/companion_ja.ts +++ b/companion/src/translations/companion_ja.ts @@ -2232,6 +2232,11 @@ Do you want to import settings from a file? %1s %1s + + + Session + + Trims @@ -2417,11 +2422,6 @@ Do you want to import settings from a file? Bind Ext. Module バインド 外部モジュール - - - Flight - フライト - Telemetry @@ -8435,22 +8435,22 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? 機体モデルはすでに存在しています！上書きしますか？それとも新しいモデルスロットに書き込みますか？ - + Overwrite 上書き - + Unable to Edit Radio Settings whilst models are open for editing. 機体モデルが編集可能な状態で、送信機設定は編集できません。 - + Delete %n selected model(s)? Delete %n selected model? @@ -8588,17 +8588,17 @@ Do you wish to continue? 機体モデルを挿入できません。リストの最後の機体モデルは削除されます。 - + Cannot paste model, out of available model slots. 機体モデルを貼り付けることができません。 - + Do you want to overwrite radio general settings? 送信機の全般設定を上書きしますか？ - + Cannot add model, could not find an available model slot. モデルを追加できません。使用可能なモデルスロットが見つかりません。 @@ -8650,52 +8650,52 @@ Do you wish to continue? - + Insert 挿入 - + Internal module protocol changed to <b>OFF</b> for %1 models! 内部モジュール・プロトコルが機体モデル %1 で <b>OFF</b> に変更されました！ - + Select a model template file 機体モデル テンプレートファイルを選択 - + Add a new model using 使用する新しい機体モデルを追加 - + Defaults デフォルト値 - + Edit 編集 - + Wizard ウィザード - + Template テンプレート - + Failed to remove temporary model! 一時的な機体モデルの削除に失敗しました！ - + Export model 機体モデル エクスポート @@ -8777,144 +8777,144 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. モデルを複製できません。利用可能なモデルスロットが見つかりません。 - + Editing model %1: 機体モデル %1 を編集しています: - + Favorites お気に入り - + Save As 名前を付けて保存 - - + + Invalid file extension! 無効なファイル拡張子です！ - + %1 has been modified. Do you want to save your changes? %1 は変更されました。 変更を保存しますか？ - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> <p><b>現在選択されている送信機タイプ (%1) はファイル %3 (from %2) と互換性がありません。機体モデルと設定を変換する必要があります。</b></p> - + Do you wish to continue with the conversion? 変換を続けますか？ - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. ファイルを変換するには<i>適用</i>を、変換せずに閉じるには<i>閉じる</i>を選択します。 - + <b>The conversion generated some important messages, please review them below.</b> <b>変換によっていくつかの重要なメッセージが出力されました。下記の内容を確認してください。</b> - + Companion :: Conversion Result for %1 Companion :: 変換結果 %1 - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again このメッセージを再度表示しません - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Models status - + No errors - + Errors - + Open backup Models and Settings file バックアップされたモデルと設定ファイルを開く - + Unable to find file %1! ファイル %1 が見つかりません！ - + Error opening file %1: %2. ファイルを開くときにエラーが発生しました %1: %2. - + Error reading file %1: %2. ファイルの読み取りエラーです %1: %2. - + Invalid binary backup File %1 無効なバイナリバックアップファイルです %1 @@ -9462,140 +9462,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: 機体モデル: - + Throttle Source スロットル値 - + THR THR - + TH - + OFF - + Master/Jack マスター/Jack - + Slave/Jack スレーブ/Jack - + Master/SBUS Module マスター/SBUSモジュール - + Master/CPPM Module マスター/CPPMモジュール - + Master/Serial マスター/シリアル - + Master/Bluetooth マスター/Bluetooth - + Slave/Bluetooth スレーブ/Bluetooth - + Master/Multi マスター/マルチ - + Master/CRSF - + NONE なし - + TOGGLE トグル - + 2POS - + Global - + SW SW - - + + Off OFF - + --- --- - + Group - + On ON - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore リストア @@ -10403,27 +10403,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index インデックス - + Name 名称 - + RX # 受信 # - + Labels ラベル - + Model %1 Translators: do NOT use accents here, this is a default model name. 機体モデル %1 @@ -10699,292 +10699,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry テレメトリー なし - + MLink - - + + SPort - + Trainer Port トレーナーポート - + Internal Radio System 内部送信システム - + External Radio Module 外部送信モジュール - + Extra Radio System 追加送信システム - + Radio System 送信システム - + OFF - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat VBatでのSBUS出力 - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) 200mW - 16CH (テレメトリーなし) - + 500mW - 16CH (no telemetry) 500mW - 16CH (テレメトリーなし) - + 100mW - 16CH (no telemetry) 100mW - 16CH (テレメトリーなし) - + 25 mW 25 mW - + 100 mW 100 mW - + 500 mW 500 mW - + 1 W 1 W - + 2 W 2 W - + CH5 CH5 - + Switch スイッチ @@ -16321,7 +16321,7 @@ Timestamp Write Firmware to Radio - + ファームウェアを送信機へ書き込み @@ -16589,7 +16589,7 @@ Timestamp Write Firmware to Radio - + ファームウェアを送信機へ書き込み @@ -17950,14 +17950,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_ko.ts b/companion/src/translations/companion_ko.ts index 09da2787e46..e2c04b4eac1 100644 --- a/companion/src/translations/companion_ko.ts +++ b/companion/src/translations/companion_ko.ts @@ -2251,6 +2251,11 @@ Do you want to import settings from a file? %1s %1초 + + + Session + + Trims @@ -2436,11 +2441,6 @@ Do you want to import settings from a file? Bind Ext. Module 외장 모듈 바인딩 - - - Flight - 비행 - Telemetry @@ -8438,22 +8438,22 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? 모델이 이미 존재합니다! 덮어쓰시겠습니까, 아니면 새로운 슬롯에 삽입하시겠습니까? - + Overwrite 덮어쓰기 - + Unable to Edit Radio Settings whilst models are open for editing. 모델이 열려 있는 동안에는 라디오 설정을 편집할 수 없습니다. - + Delete %n selected model(s)? %n개의 선택된 모델을 삭제하시겠습니까? @@ -8591,17 +8591,17 @@ Do you wish to continue? 모델을 삽입할 수 없습니다. 리스트의 마지막 모델이 삭제됩니다. - + Cannot paste model, out of available model slots. 모델을 붙여넣을 수 없습니다. 사용 가능한 모델 슬롯이 없습니다. - + Do you want to overwrite radio general settings? 라디오 일반 설정을 덮어쓰시겠습니까? - + Cannot add model, could not find an available model slot. 모델을 추가할 수 없습니다. 사용 가능한 모델 슬롯을 찾을 수 없습니다. @@ -8653,52 +8653,52 @@ Do you wish to continue? - + Insert 삽입 - + Internal module protocol changed to <b>OFF</b> for %1 models! %1 모델에 대해 내부 모듈 프로토콜이 <b>OFF</b>로 변경되었습니다! - + Select a model template file 모델 템플릿 파일 선택 - + Add a new model using 다음 항목을 사용하여 새 모델 추가 - + Defaults 기본값 - + Edit 편집 - + Wizard 마법사 - + Template 템플릿 - + Failed to remove temporary model! 임시 모델을 삭제하지 못했습니다! - + Export model 모델 내보내기 @@ -8780,144 +8780,144 @@ Do you wish to continue? 모델 오류 표시 - + Cannot duplicate model, could not find an available model slot. 모델을 복제할 수 없습니다. 사용 가능한 모델 슬롯이 없습니다. - + Editing model %1: 모델 %1 편집 중: - + Favorites 즐겨찾기 - + Save As 다른 이름으로 저장 - - + + Invalid file extension! 잘못된 파일 확장자입니다! - + %1 has been modified. Do you want to save your changes? %1이(가) 수정되었습니다. 변경 내용을 저장하시겠습니까? - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> <p><b>현재 선택된 라디오 유형(%1)은 파일 %3(%2에서 가져옴)과 호환되지 않으며, 모델과 설정을 변환해야 합니다.</b></p> - + Do you wish to continue with the conversion? 변환을 계속하시겠습니까? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. 변환하려면 <i>적용</i>을 선택하고, 변환하지 않으려면 <i>닫기</i>를 선택하세요. - + <b>The conversion generated some important messages, please review them below.</b> <b>변환 중 중요한 메시지가 생성되었습니다. 아래 내용을 확인해 주세요.</b> - + Companion :: Conversion Result for %1 Companion :: %1에 대한 변환 결과 - + Write Models and Settings 모델 및 설정 쓰기 - + Operation aborted as %1 models have significant errors that may affect model operation. %1개의 모델에 작동에 영향을 줄 수 있는 중대한 오류가 있어 작업이 중단되었습니다. - + You are about to overwrite ALL models. 모든 모델을 덮어쓰려 합니다. - + Continue? 계속하시겠습니까? - + Do not show this message again 이 메시지를 다시 표시하지 않음 - + Unable to find SD card! SD 카드를 찾을 수 없습니다! - + Models and settings written 모델 및 설정이 저장되었습니다 - + Error writing models and settings! 모델 및 설정 저장 중 오류가 발생했습니다! - + Models status 모델 상태 - + No errors 오류 없음 - + Errors 오류 - + Open backup Models and Settings file 백업된 모델 및 설정 파일 열기 - + Unable to find file %1! 파일 %1을(를) 찾을 수 없습니다! - + Error opening file %1: %2. 파일 %1 열기 오류: %2 - + Error reading file %1: %2. 파일 %1 읽기 오류: %2 - + Invalid binary backup File %1 잘못된 이진 백업 파일: %1 @@ -9466,140 +9466,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: 모델: - + Throttle Source 스로틀 소스 - + THR 스로틀 - + TH - + OFF 꺼짐 - + Master/Jack 마스터 / 잭 - + Slave/Jack 슬레이브 / 잭 - + Master/SBUS Module 마스터 / SBUS 모듈 - + Master/CPPM Module 마스터 / CPPM 모듈 - + Master/Serial 마스터 / 시리얼 - + Master/Bluetooth 마스터 / 블루투스 - + Slave/Bluetooth 슬레이브 / 블루투스 - + Master/Multi 마스터 / 멀티 - + Master/CRSF 마스터 / CRSF - + NONE 없음 - + TOGGLE 토글 - + 2POS 2단 스위치 - + Global - + SW 스위치 - - + + Off 꺼짐 - + --- - + Group 그룹 - + On 켜짐 - + Error - Input %1 Line %2 %3 오류 - 입력 %1 줄 %2 %3 - - + + has no source 소스가 없습니다 - + Error - Mix %1 Line %2 %3 오류 - 믹스 %1 줄 %2 %3 - - + + Restore 복원 @@ -10407,27 +10407,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index 번호 - + Name 이름 - + RX # 수신기 번호 - + Labels 라벨 - + Model %1 Translators: do NOT use accents here, this is a default model name. 모델 %1 @@ -10703,292 +10703,292 @@ p, li { white-space: pre-wrap; } 현재 펌웨어 보드가 변환 대상 보드와 일치하지 않습니다 - - + + No Telemetry 텔레메트리 없음 - + MLink - - + + SPort S포트 - + Trainer Port 트레이너 포트 - + Internal Radio System 내장 라디오 시스템 - + External Radio Module 외장 라디오 모듈 - + Extra Radio System 추가 라디오 시스템 - + Radio System 라디오 시스템 - + OFF 꺼짐 - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim PPM 시뮬레이터 - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi 멀티 프로토콜 - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat VBat 전압의 SBUS 출력 - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH 10mW - 16채널 - - + + 100mW - 16CH 100mW - 16채널 - + 500mW - 16CH 500mW - 16채널 - + Auto <= 1W - 16CH 자동 <= 1W - 16채널 - - + + 25mW - 8CH 25mW - 8채널 - - + + 25mW - 16CH 25mW - 16채널 - + 200mW - 16CH (no telemetry) 200mW - 16채널 (텔레메트리 없음) - + 500mW - 16CH (no telemetry) 500mW - 16채널 (텔레메트리 없음) - + 100mW - 16CH (no telemetry) 100mW - 16채널 (텔레메트리 없음) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch 스위치 @@ -16316,7 +16316,7 @@ Timestamp Write Firmware to Radio - + 라디오에 펌웨어 쓰기 @@ -16584,7 +16584,7 @@ Timestamp Write Firmware to Radio - + 라디오에 펌웨어 쓰기 @@ -17944,14 +17944,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings 모델 설정 읽기 diff --git a/companion/src/translations/companion_nl.ts b/companion/src/translations/companion_nl.ts index 603095a96b5..877f5415d8b 100644 --- a/companion/src/translations/companion_nl.ts +++ b/companion/src/translations/companion_nl.ts @@ -2309,7 +2309,7 @@ Do you want to import settings from a file? - Flight + Session @@ -8356,54 +8356,54 @@ Do you wish to continue? MdiChild - + Editing model %1: - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Unable to find file %1! - + Error opening file %1: %2. - + Error reading file %1: %2. - + Save As @@ -8523,7 +8523,7 @@ Do you wish to continue? - + Insert @@ -8675,37 +8675,37 @@ Do you wish to continue? - + Cannot add model, could not find an available model slot. - + Cannot paste model, out of available model slots. - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Do you want to overwrite radio general settings? - + Unable to Edit Radio Settings whilst models are open for editing. - + Delete %n selected model(s)? @@ -8713,134 +8713,134 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. - + Favorites - - + + Invalid file extension! - + %1 has been modified. Do you want to save your changes? - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Models status - + No errors - + Errors - + Open backup Models and Settings file - + Invalid binary backup File %1 - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -9378,140 +9378,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source - + THR - + TH - + OFF - + Master/Jack - + Slave/Jack - + Master/SBUS Module - + Master/CPPM Module - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global - + SW - - + + Off - + --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10319,27 +10319,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index - + Name - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. @@ -10605,292 +10605,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port - + Internal Radio System - + External Radio Module - + Extra Radio System - + Radio System - + OFF - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch Switch @@ -17811,14 +17811,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_pl.ts b/companion/src/translations/companion_pl.ts index 1a76a38714a..d46f7bd835c 100644 --- a/companion/src/translations/companion_pl.ts +++ b/companion/src/translations/companion_pl.ts @@ -2225,6 +2225,11 @@ Do you want to import settings from a file? %1s %1s + + + Session + + Trims @@ -2410,11 +2415,6 @@ Do you want to import settings from a file? Bind Ext. Module Bindowanie Zew. Modułu - - - Flight - Lot - Telemetry @@ -8410,29 +8410,29 @@ Do you wish to continue? MdiChild - + Editing model %1: Edycja modelu %1: - + Favorites - + Unable to find file %1! Nie mogę odnaleźć pliku %1! - + Error opening file %1: %2. Błąd otwarcia pliku %1: %2. - + Save As Zapisz jako @@ -8554,7 +8554,7 @@ Do you wish to continue? - + Insert Wprowadź @@ -8590,63 +8590,63 @@ Do you wish to continue? - + Unable to Edit Radio Settings whilst models are open for editing. - - + + Invalid file extension! - + Do not show this message again - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit Edycja - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -8726,17 +8726,17 @@ Do you wish to continue? Nie moge dodać modelu, ostatni model z listy zostanie skasowany. - + Cannot add model, could not find an available model slot. Nie moge dodać modelu, brak dostępnego miejsca. - + Cannot paste model, out of available model slots. Nie moge wkleić modelu, brak dostępnego miejsca. - + Delete %n selected model(s)? Wykasuj %n wybrany model? @@ -8745,74 +8745,74 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. Nie moge powielić modelu, brak dostępnego miejsca. - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Error reading file %1: %2. Błąd odczytu pliku %1: %2. - + Models status - + No errors - + Errors - + %1 has been modified. Do you want to save your changes? %1 został zmieniony. @@ -8860,47 +8860,47 @@ Zapisać? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Do you want to overwrite radio general settings? Czy chcesz nadpisać główne ustawienia radia? - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Open backup Models and Settings file Otwórz plik backupu Modeli i Ustawień - + Invalid binary backup File %1 nieprawidłowy binarny plik %1 @@ -9448,140 +9448,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source Źródło gazu - + THR THR - + TH - + OFF Wyłącz - + Master/Jack Trener/Jack - + Slave/Jack Uczeń/Jack - + Master/SBUS Module Trener/SBUS Moduł - + Master/CPPM Module Trener/CPPM Moduł - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global Globalne - + SW - - + + Off Wyłącz - + --- --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10389,27 +10389,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index Indeks - + Name Nazwa - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. Model %1 @@ -10685,292 +10685,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port Port trenera - + Internal Radio System Wewnętrzny moduł radiowy - + External Radio Module Zewnętrzny moduł radiowy - + Extra Radio System System Radiowy Ekstra - + Radio System System radia - + OFF Wyłącz - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 KN5 - + Switch Przełącznik @@ -17913,14 +17913,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_pt.ts b/companion/src/translations/companion_pt.ts index 20ca85f91bd..6d8b9e6b096 100644 --- a/companion/src/translations/companion_pt.ts +++ b/companion/src/translations/companion_pt.ts @@ -2309,7 +2309,7 @@ Do you want to import settings from a file? - Flight + Session @@ -8471,7 +8471,7 @@ Do you wish to continue? - + Insert @@ -8623,37 +8623,37 @@ Do you wish to continue? - + Cannot add model, could not find an available model slot. - + Cannot paste model, out of available model slots. - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Do you want to overwrite radio general settings? - + Unable to Edit Radio Settings whilst models are open for editing. - + Delete %n selected model(s)? @@ -8661,185 +8661,185 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. - + Editing model %1: A editar o modelo %1: - + Favorites - - + + Invalid file extension! - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Models status - + No errors - + Errors - + Unable to find file %1! Impossível encontrar o ficheiro %1! - + Error reading file %1: %2. - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit Editar - + Wizard - + Template - + Failed to remove temporary model! - + Export model - + Error opening file %1: %2. - + Save As Gravar Como - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Open backup Models and Settings file - + Invalid binary backup File %1 - + %1 has been modified. Do you want to save your changes? @@ -9378,140 +9378,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source - + THR THR - + TH - + OFF OFF - + Master/Jack - + Slave/Jack - + Master/SBUS Module - + Master/CPPM Module - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global - + SW - - + + Off - + --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10319,27 +10319,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index - + Name Nome - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. @@ -10605,292 +10605,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port - + Internal Radio System - + External Radio Module - + Extra Radio System - + Radio System - + OFF OFF - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch Interruptor @@ -17811,14 +17811,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_ru.ts b/companion/src/translations/companion_ru.ts index 9cdab204e1f..b7a06b2fe7e 100644 --- a/companion/src/translations/companion_ru.ts +++ b/companion/src/translations/companion_ru.ts @@ -2246,6 +2246,11 @@ Do you want to import settings from a file? %1s + + + Session + + Trims @@ -2431,11 +2436,6 @@ Do you want to import settings from a file? Bind Ext. Module - - - Flight - - Telemetry @@ -2822,7 +2822,7 @@ Do you want to import settings from a file? OFF - + ВЫКЛ @@ -3041,7 +3041,7 @@ To <b>remove a remembered entry</b> from the filter list, first cho OFF - + ВЫКЛ @@ -5083,7 +5083,7 @@ Are you sure? OFF - + ВЫКЛ @@ -8421,64 +8421,64 @@ Do you wish to continue? MdiChild - + Editing model %1: Редактирование модели %1: - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Unable to find file %1! Невозможно найти файл %1! - + Error reading file %1: %2. Ошибка при считывании файла %1: %2. - + Error opening file %1: %2. @@ -8617,7 +8617,7 @@ Do you wish to continue? - + Insert Вставить @@ -8728,22 +8728,22 @@ Do you wish to continue? - + Cannot add model, could not find an available model slot. - + Cannot paste model, out of available model slots. - + Do you want to overwrite radio general settings? - + Delete %n selected model(s)? Удалить выбранную модель? @@ -8752,73 +8752,73 @@ Do you wish to continue? - + Cannot duplicate model, could not find an available model slot. - + Save As Сохранить как - - + + Invalid file extension! - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Models status - + No errors - + Errors - + Open backup Models and Settings file - + Invalid binary backup File %1 - + %1 has been modified. Do you want to save your changes? %1 изменен. @@ -8850,67 +8850,67 @@ Do you want to save your changes? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Unable to Edit Radio Settings whilst models are open for editing. - + Favorites - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit Правка - + Wizard - + Template Шаблон - + Failed to remove temporary model! - + Export model @@ -9459,140 +9459,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source Канал газа - + THR - + TH - + OFF - + ВЫКЛ - + Master/Jack Главный (джек) - + Slave/Jack Ученик (джек) - + Master/SBUS Module Главный (SBUS модуль) - + Master/CPPM Module Главный (модуль CPPM) - + Master/Serial - + Master/Bluetooth Главный (bluetooth) - + Slave/Bluetooth Ученик (bluetooth) - + Master/Multi Главный (мультимодуль) - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global - + SW - - + + Off - + --- - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10400,27 +10400,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index Номер - + Name Название - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. Модель %1 @@ -10686,292 +10686,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port - + Internal Radio System Встроенный радиомодуль - + External Radio Module Внешний радиомодуль - + Extra Radio System - + Radio System - + OFF - + ВЫКЛ - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH 10 мВт - 16 каналов - - + + 100mW - 16CH 100 мВт - 16 каналов - + 500mW - 16CH 500 мВт - 16 каналов - + Auto <= 1W - 16CH Автоматически: < 1 Вт - 16 каналов - - + + 25mW - 8CH 25 мВт - 8 каналов - - + + 25mW - 16CH 25 мВт - 16 каналов - + 200mW - 16CH (no telemetry) 200 мВт - 16 каналов (без телеметрии) - + 500mW - 16CH (no telemetry) 500 мВт - 16 каналов (без телеметрии) - + 100mW - 16CH (no telemetry) 100 мВт - 16 каналов (без телеметрии) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch Тумблер @@ -16085,7 +16085,7 @@ Timestamp OFF - + ВЫКЛ @@ -16128,7 +16128,7 @@ Timestamp OFF - + ВЫКЛ @@ -16282,7 +16282,7 @@ Timestamp Write Firmware to Radio - + Обновить прошивку передатчика @@ -16550,7 +16550,7 @@ Timestamp Write Firmware to Radio - + Обновить прошивку передатчика @@ -17899,14 +17899,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_sv.ts b/companion/src/translations/companion_sv.ts index cb30568f329..fb892a21312 100644 --- a/companion/src/translations/companion_sv.ts +++ b/companion/src/translations/companion_sv.ts @@ -2242,11 +2242,6 @@ Vill du hämta inställningarna från en fil? Push Custom Switch %1 Tryck på Anpassingsbar brytare %1 - - - Flight - Flygning - Telemetry @@ -2257,6 +2252,11 @@ Vill du hämta inställningarna från en fil? s + + + Session + + Trims @@ -8451,63 +8451,63 @@ Vill du fortsätta? MdiChild - + Editing model %1: Redigera modell %1: - + Unable to find file %1! Kan inte hitta filen %1! - + Error reading file %1: %2. Fel vid inläsning av fil %1: %2. - + Error opening file %1: %2. Fel vid öppning av fil %1: %2. - + Save As Spara som - + %1 has been modified. Do you want to save your changes? %1 har ändrats. Vill du spara ändringarna? - + Unable to find SD card! Kan inte hitta SD-kortet! - + Models and settings written Modeller och inställningar skrivna - + Error writing models and settings! Fel vid skrivning av modeller och inställningar! - + Open backup Models and Settings file Öppna modell- och inställningsfil - + Invalid binary backup File %1 Binära säkerhetskopian är felaktig %1 @@ -8523,7 +8523,7 @@ Vill du spara ändringarna? Alt+S - + Do you want to overwrite radio general settings? Vill du skriva över de generella radioinställningarna? @@ -8617,7 +8617,7 @@ Vill du spara ändringarna? - + Insert Lägg till @@ -8712,17 +8712,17 @@ Vill du spara ändringarna? Kan inte lägga till modell, sista modellen i listan skulle raderas. - + Cannot add model, could not find an available model slot. Kan inte lägga till modell, ingen modellplats tillgänglig. - + Cannot paste model, out of available model slots. Kan inte klistra in modell, slut på lediga modellplatser. - + Delete %n selected model(s)? Radera %n vald modell? @@ -8730,47 +8730,47 @@ Vill du spara ändringarna? - + Cannot duplicate model, could not find an available model slot. Kan inte duplicera modellen, ingen ledig modellplats finns. - + Do you wish to continue with the conversion? Vill du fortsätta med konverteringen? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. Välj <i>Tillämpa</i> för att konvertera filen, eller <i>Stäng</i> för att stänga filen utan konvertering. - + <b>The conversion generated some important messages, please review them below.</b> <b>Konverteringen genererade några viktiga meddelanden, se nedan.</b> - + Companion :: Conversion Result for %1 Companion :: Resultat för konverteringen av %1 - + Models status Modellstatus - + No errors Inga fel - + Errors Fel - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> <p><b>Aktiv radiotyp (%1) är inte kompatibel med fil %3 (från %2), modeller och inställningar behöver konverteras.</b></p> @@ -8780,37 +8780,37 @@ Vill du spara ändringarna? endast läsning - + Unable to Edit Radio Settings whilst models are open for editing. Kan inte ändra radioinställnngar medan modeller är öppna för redigering. - + Select a model template file Välj en modellmallsfil - + Add a new model using Lägg till modell genom att använda - + Defaults Förval - + Edit Redigera - + Wizard Guide - + Failed to remove temporary model! Temporär modell kunde inte tas bort! @@ -8837,32 +8837,32 @@ Vill du spara ändringarna? Exportera modell - + Model already exists! Do you want to overwrite it or insert into a new slot? Modellen finns redan! Vill du skriva över den eller lägga till den på en ny plats? - + Overwrite Skriva över - + Favorites Favoriter - + Internal module protocol changed to <b>OFF</b> for %1 models! Den interna modulens protokoll ändrades till <b>AV</b> för %1 modeller! - + Template Mall - + Export model Exportera modell @@ -8912,33 +8912,33 @@ Vill du spara ändringarna? Visa verktygsfältet för etiketter - - + + Invalid file extension! Ogiltigt filsuffix! - + Write Models and Settings Skriv modeller och inställningar - + Operation aborted as %1 models have significant errors that may affect model operation. Operationen avböts då %1 modeller har avsevärda fel som kan påverka hanteringen av dem. - + You are about to overwrite ALL models. Du är på väg att skriva över ALLA modeller. - + Continue? Fortsätta? - + Do not show this message again Visa inte detta meddelande igen @@ -9486,140 +9486,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: Modell: - + THR GAS - + OFF AV - + Throttle Source Gaskälla - + Slave/Jack Elev/Uttag - + Master/SBUS Module Lärare/SBUS-modul - + Master/CPPM Module Lärare/CPPM-modul - + Master/Jack Lärare/Uttag - + TH GAS - + Master/Serial Lärare/Seriell - + Master/Bluetooth Lärare/Bluetooth - + Slave/Bluetooth Elev/Bluetooth - + Master/Multi Lärare/Multi - + Master/CRSF Lärare/CRSF - + NONE INGEN - + TOGGLE SKIFTA - + 2POS - + Global Global - + SW - - + + Off Av - + --- - + Group Grupp - + On På - + Error - Input %1 Line %2 %3 Fel - Input %1 rad %2 %3 - - + + has no source saknar källa - + Error - Mix %1 Line %2 %3 Fel - Mix %1 rad %2 %3 - - + + Restore Återställ @@ -10427,27 +10427,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index - + Name Namn - + RX # Mottagare # - + Labels Etiketter - + Model %1 Translators: do NOT use accents here, this is a default model name. Modell %1 @@ -10718,115 +10718,115 @@ p, li { white-space: pre-wrap; } Negativ - + Trainer Port Lärarport - + Internal Radio System Internt radiosystem - + External Radio Module Extern radiomodul - + Extra Radio System Ytterligare radiosystem - + Radio System Radiosystem - + Flysky AFHDS2A - + Flysky AFHDS3 - + 10mW - 16CH 10mW - 16KA - - + + 100mW - 16CH 100mW - 16KA - + 500mW - 16CH 500mW - 16KA - + Auto <= 1W - 16CH Auto <= 1W - 16KA - - + + 25mW - 8CH 25mW - 8KA - - + + 25mW - 16CH 25mW - 16KA - + 200mW - 16CH (no telemetry) 200mW - 16KA (ingen telemetri) - + 500mW - 16CH (no telemetry) 500mW - 16KA (ingen telemetri) - + 100mW - 16CH (no telemetry) 100mW - 16KA (ingen telemetri) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + OFF AV @@ -10836,179 +10836,179 @@ p, li { white-space: pre-wrap; } - - + + SPort - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Ghost - + Lemon-Rx DSMP - + CH5 KA5 - + Switch Brytare - - + + No Telemetry Ingen telemetri - + MLink @@ -17987,14 +17987,14 @@ Vill du fortsätta? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings Läs radioinställningar diff --git a/companion/src/translations/companion_zh_CN.ts b/companion/src/translations/companion_zh_CN.ts index 83eeb6e7f01..7cdaf2d359a 100644 --- a/companion/src/translations/companion_zh_CN.ts +++ b/companion/src/translations/companion_zh_CN.ts @@ -2258,6 +2258,11 @@ Do you want to import settings from a file? %1s %1s + + + Session + + Trims @@ -2438,11 +2443,6 @@ Do you want to import settings from a file? Bind Ext. Module 外置高频头对频 - - - Flight - 飞行 [Flight] - Telemetry @@ -8498,7 +8498,7 @@ Do you wish to continue? - + Do you want to overwrite radio general settings? 你希望覆盖遥控器一般设定么？ @@ -8590,7 +8590,7 @@ Do you wish to continue? - + Insert @@ -8680,119 +8680,119 @@ Do you wish to continue? - + Cannot add model, could not find an available model slot. - + Cannot paste model, out of available model slots. - + Delete %n selected model(s)? - + Cannot duplicate model, could not find an available model slot. - + Editing model %1: 编辑模型 %1: - - + + Invalid file extension! - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Models status - + No errors - + Errors - + Unable to find file %1! 无法找到文件 %1! - + Error opening file %1: %2. 打开文件错误 %1: %2. - + Error reading file %1: %2. 打开文件错误 %1: %2. - + Save As 另存为 @@ -8874,104 +8874,104 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Unable to Edit Radio Settings whilst models are open for editing. - + Favorites - + %1 has been modified. Do you want to save your changes? %1已经修改. 想要保存修改么? - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Open backup Models and Settings file 打开备份的模型和设置文件 - + Invalid binary backup File %1 无效的二进制备份文件 %1 - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit 编辑 - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -9524,140 +9524,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source 设为油门杆 [Thr Source] - + THR 油门 - + TH - + OFF - + Master/Jack 教练主机/教练线插口 [Master/Jack] - + Slave/Jack 教练从机/教练线插口 [Slave/Jack] - + Master/SBUS Module 教练主机/SBUS 模块 [Master/SBUS] - + Master/CPPM Module 教练主机/CPPM 模块 [Master/CPPM] - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global 全局 - + SW - - + + Off - + --- 正向 [→] - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10472,27 +10472,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index 模型编号 - + Name - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. @@ -10772,292 +10772,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port 教练功能 [Trainer Port] - + Internal Radio System 内置高频头 [Internal RF] - + External Radio Module 外置高频头 [External RF] - + Extra Radio System 附加高频头 [Extra RF] - + Radio System 高频头 [Radio System] - + OFF - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch @@ -16372,7 +16372,7 @@ Timestamp Write Firmware to Radio - + 将固件写入遥控器 @@ -16640,7 +16640,7 @@ Timestamp Write Firmware to Radio - + 将固件写入遥控器 @@ -17990,14 +17990,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/companion/src/translations/companion_zh_TW.ts b/companion/src/translations/companion_zh_TW.ts index 23e161adc27..09e5cbbd81c 100644 --- a/companion/src/translations/companion_zh_TW.ts +++ b/companion/src/translations/companion_zh_TW.ts @@ -2253,6 +2253,11 @@ Do you want to import settings from a file? %1s %1s + + + Session + + Trims @@ -2341,7 +2346,7 @@ Do you want to import settings from a file? Value - + 設為 @@ -2438,11 +2443,6 @@ Do you want to import settings from a file? Bind Ext. Module 外置高頻頭對頻 - - - Flight - 飛行 [Flight] - Telemetry @@ -8498,7 +8498,7 @@ Do you wish to continue? - + Do you want to overwrite radio general settings? 你希望覆蓋遙控器一般設定嗎？ @@ -8590,7 +8590,7 @@ Do you wish to continue? - + Insert @@ -8680,119 +8680,119 @@ Do you wish to continue? - + Cannot add model, could not find an available model slot. - + Cannot paste model, out of available model slots. - + Delete %n selected model(s)? - + Cannot duplicate model, could not find an available model slot. - + Editing model %1: 編輯模型 %1: - - + + Invalid file extension! - + <p><b>Currently selected radio type (%1) is not compatible with file %3 (from %2), models and settings need to be converted.</b></p> - + Write Models and Settings - + Operation aborted as %1 models have significant errors that may affect model operation. - + You are about to overwrite ALL models. - + Continue? - + Do not show this message again - + Unable to find SD card! - + Models and settings written - + Error writing models and settings! - + Models status - + No errors - + Errors - + Unable to find file %1! 無法找到文件 %1! - + Error opening file %1: %2. 打開文件錯誤 %1: %2. - + Error reading file %1: %2. 打開文件錯誤 %1: %2. - + Save As 另存為 @@ -8874,104 +8874,104 @@ Do you wish to continue? - + Model already exists! Do you want to overwrite it or insert into a new slot? - + Overwrite - + Unable to Edit Radio Settings whilst models are open for editing. - + Favorites - + %1 has been modified. Do you want to save your changes? %1已經修改. 想要保存修改嗎? - + Do you wish to continue with the conversion? - + Choose <i>Apply</i> to convert the file, or <i>Close</i> to close it without conversion. - + <b>The conversion generated some important messages, please review them below.</b> - + Companion :: Conversion Result for %1 - + Open backup Models and Settings file 打開備份的模型和設置文件 - + Invalid binary backup File %1 無效的二進製備份文件 %1 - + Internal module protocol changed to <b>OFF</b> for %1 models! - + Select a model template file - + Add a new model using - + Defaults - + Edit 編輯 - + Wizard - + Template - + Failed to remove temporary model! - + Export model @@ -9524,140 +9524,140 @@ p, li { white-space: pre-wrap; } ModelData - + Model: - + Throttle Source 設為油門桿 [Thr Source] - + THR 油門 - + TH - + OFF - + Master/Jack - + Slave/Jack 教練從機/教練線插口 [Slave/Jack] - + Master/SBUS Module - + Master/CPPM Module - + Master/Serial - + Master/Bluetooth - + Slave/Bluetooth - + Master/Multi - + Master/CRSF - + NONE - + TOGGLE - + 2POS - + Global 全局 - + SW - - + + Off - + --- 正向 [→] - + Group - + On - + Error - Input %1 Line %2 %3 - - + + has no source - + Error - Mix %1 Line %2 %3 - - + + Restore @@ -10472,27 +10472,27 @@ p, li { white-space: pre-wrap; } ModelsListModel - + Index 模型編號 - + Name - + RX # - + Labels - + Model %1 Translators: do NOT use accents here, this is a default model name. @@ -10772,292 +10772,292 @@ p, li { white-space: pre-wrap; } - - + + No Telemetry - + MLink - - + + SPort - + Trainer Port 教練功能 [Trainer Port] - + Internal Radio System 內置高頻頭 [Internal RF] - + External Radio Module 外置高頻頭 [External RF] - + Extra Radio System 附加高頻頭 [Extra RF] - + Radio System 高頻頭 [Radio System] - + OFF - + PPM - + Silverlit A - + Silverlit B - + Silverlit C - + CTP1009 - + LP45 - + DSM2 - + DSMX - + PPM16 - + PPMsim - + FrSky XJT (D16) - + FrSky XJT (D8) - + FrSky XJT (LR12) - + FrSky DJT - + Crossfire - + Multi - + FrSky R9M - + FrSky R9M Lite - + FrSky R9M Lite Pro - + SBUS output at VBat - + FrSky ACCESS ISRM - + FrSky ACCST ISRM D16 - + FrSky ACCESS R9M 2019 - + FrSky ACCESS R9M Lite - + FrSky ACCESS R9M Lite Pro - + FrSky XJT lite (D16) - + FrSky XJT lite (D8) - + FrSky XJT lite (LR12) - + Flysky AFHDS2A - + Flysky AFHDS3 - + Ghost - + Lemon-Rx DSMP - + 10mW - 16CH - - + + 100mW - 16CH - + 500mW - 16CH - + Auto <= 1W - 16CH - - + + 25mW - 8CH - - + + 25mW - 16CH - + 200mW - 16CH (no telemetry) - + 500mW - 16CH (no telemetry) - + 100mW - 16CH (no telemetry) - + 25 mW - + 100 mW - + 500 mW - + 1 W - + 2 W - + CH5 CH5 - + Switch @@ -16372,7 +16372,7 @@ Timestamp Write Firmware to Radio - + 將韌體寫入遙控器 @@ -16640,7 +16640,7 @@ Timestamp Write Firmware to Radio - + 將韌體寫入遙控器 @@ -17990,14 +17990,14 @@ Do you wish to continue? YamlModelSettings - + Warning: '%1' has settings version %2 that is not supported by Companion %3! Model settings may be corrupted if you continue. - + Read Model Settings diff --git a/radio/src/gui/128x64/view_main.cpp b/radio/src/gui/128x64/view_main.cpp index 398eafeb895..2a8c6f5ef11 100644 --- a/radio/src/gui/128x64/view_main.cpp +++ b/radio/src/gui/128x64/view_main.cpp @@ -318,12 +318,12 @@ void onMainViewMenu(const char * result) pushModelNotes(); } else if (result == STR_RESET_SUBMENU) { - POPUP_MENU_START(onMainViewMenu, 5, STR_RESET_FLIGHT, STR_RESET_TIMER1, STR_RESET_TIMER2, STR_RESET_TIMER3, STR_RESET_TELEMETRY); + POPUP_MENU_START(onMainViewMenu, 5, STR_RESET_SESSION, STR_RESET_TIMER1, STR_RESET_TIMER2, STR_RESET_TIMER3, STR_RESET_TELEMETRY); } else if (result == STR_RESET_TELEMETRY) { telemetryReset(); } - else if (result == STR_RESET_FLIGHT) { + else if (result == STR_RESET_SESSION) { flightReset(); } else if (result == STR_STATISTICS) { diff --git a/radio/src/gui/212x64/view_main.cpp b/radio/src/gui/212x64/view_main.cpp index 610c86f0655..cd493fcb675 100644 --- a/radio/src/gui/212x64/view_main.cpp +++ b/radio/src/gui/212x64/view_main.cpp @@ -408,12 +408,12 @@ void onMainViewMenu(const char * result) pushModelNotes(); } else if (result == STR_RESET_SUBMENU) { - POPUP_MENU_START(onMainViewMenu, 5, STR_RESET_FLIGHT, STR_RESET_TIMER1, STR_RESET_TIMER2, STR_RESET_TIMER3, STR_RESET_TELEMETRY); + POPUP_MENU_START(onMainViewMenu, 5, STR_RESET_SESSION, STR_RESET_TIMER1, STR_RESET_TIMER2, STR_RESET_TIMER3, STR_RESET_TELEMETRY); } else if (result == STR_RESET_TELEMETRY) { telemetryReset(); } - else if (result == STR_RESET_FLIGHT) { + else if (result == STR_RESET_SESSION) { flightReset(); } else if (result == STR_STATISTICS) { diff --git a/radio/src/gui/colorlcd/setup_menus/quick_menu_data.cpp b/radio/src/gui/colorlcd/setup_menus/quick_menu_data.cpp index 633aa45978e..a65f45a79a5 100644 --- a/radio/src/gui/colorlcd/setup_menus/quick_menu_data.cpp +++ b/radio/src/gui/colorlcd/setup_menus/quick_menu_data.cpp @@ -120,7 +120,7 @@ QMTopDef qmTopItems[] = { []() { QuickMenu::selected(); Menu* resetMenu = new Menu(); - resetMenu->addLine(STR_RESET_FLIGHT, []() { flightReset(); }); + resetMenu->addLine(STR_RESET_SESSION, []() { flightReset(); }); resetMenu->addLine(STR_RESET_TIMER1, []() { timerReset(0); }); resetMenu->addLine(STR_RESET_TIMER2, []() { timerReset(1); }); resetMenu->addLine(STR_RESET_TIMER3, []() { timerReset(2); }); @@ -239,7 +239,7 @@ PageDef toolsMenuItems[] = { []() { QuickMenu::selected(); Menu* resetMenu = new Menu(); - resetMenu->addLine(STR_RESET_FLIGHT, []() { flightReset(); }); + resetMenu->addLine(STR_RESET_SESSION, []() { flightReset(); }); resetMenu->addLine(STR_RESET_TIMER1, []() { timerReset(0); }); resetMenu->addLine(STR_RESET_TIMER2, []() { timerReset(1); }); resetMenu->addLine(STR_RESET_TIMER3, []() { timerReset(2); }); diff --git a/radio/src/gui/common/stdlcd/view_telemetry.cpp b/radio/src/gui/common/stdlcd/view_telemetry.cpp index d2c6f2e6013..c23ecaf9175 100644 --- a/radio/src/gui/common/stdlcd/view_telemetry.cpp +++ b/radio/src/gui/common/stdlcd/view_telemetry.cpp @@ -51,7 +51,7 @@ void menuViewTelemetry(event_t event) incrTelemetryScreen(); } else if (event == EVT_KEY_LONG(KEY_ENTER)) { - POPUP_MENU_START(onMainViewMenu, 2, STR_RESET_TELEMETRY, STR_RESET_FLIGHT); + POPUP_MENU_START(onMainViewMenu, 2, STR_RESET_TELEMETRY, STR_RESET_SESSION); } for (int i=0; i<=TELEMETRY_SCREEN_TYPE_MAX; i++) { diff --git a/radio/src/translations/i18n/cn.h b/radio/src/translations/i18n/cn.h index 74be9980ebd..d26aaa2d716 100644 --- a/radio/src/translations/i18n/cn.h +++ b/radio/src/translations/i18n/cn.h @@ -980,7 +980,7 @@ #define TR_PASTE_BEFORE "粘贴到本条之前" #define TR_DELETE "删除" #define TR_INSERT "插入" -#define TR_RESET_FLIGHT "复位飞行数据" +#define TR_RESET_SESSION "复位飞行数据" #define TR_RESET_TIMER1 "复位计时器1" #define TR_RESET_TIMER2 "复位计时器2" #define TR_RESET_TIMER3 "复位计时器3" diff --git a/radio/src/translations/i18n/cz.h b/radio/src/translations/i18n/cz.h index 47e37644e30..09edb7351ba 100644 --- a/radio/src/translations/i18n/cz.h +++ b/radio/src/translations/i18n/cz.h @@ -978,7 +978,7 @@ #define TR_PASTE_BEFORE "Vložit před" #define TR_DELETE "Odstranit" #define TR_INSERT "Přidat" -#define TR_RESET_FLIGHT "Reset relace" +#define TR_RESET_SESSION "Reset relace" #define TR_RESET_TIMER1 "Čas1" #define TR_RESET_TIMER2 "Čas2" #define TR_RESET_TIMER3 "Čas3" diff --git a/radio/src/translations/i18n/da.h b/radio/src/translations/i18n/da.h index de5e22443c2..fda40965d57 100644 --- a/radio/src/translations/i18n/da.h +++ b/radio/src/translations/i18n/da.h @@ -985,7 +985,7 @@ #define TR_PASTE_BEFORE "Sæt ind før" #define TR_DELETE "Slet" #define TR_INSERT "Indsæt" -#define TR_RESET_FLIGHT "Nulstil flyvning" +#define TR_RESET_SESSION "Nulstil flyvning" #define TR_RESET_TIMER1 "Nulstil tidtag 1" #define TR_RESET_TIMER2 "Nulstil tidtag 2" #define TR_RESET_TIMER3 "Nulstil tidtag 3" diff --git a/radio/src/translations/i18n/de.h b/radio/src/translations/i18n/de.h index bea9fa00343..107a9312272 100644 --- a/radio/src/translations/i18n/de.h +++ b/radio/src/translations/i18n/de.h @@ -974,7 +974,7 @@ #define TR_PASTE_BEFORE "Einfügen davor" #define TR_DELETE "Zeile löschen" #define TR_INSERT "Neue Zeile" -#define TR_RESET_FLIGHT "Reset Flugdaten" +#define TR_RESET_SESSION "Reset Flugdaten" #define TR_RESET_TIMER1 "Reset Timer1" #define TR_RESET_TIMER2 "Reset Timer2" #define TR_RESET_TIMER3 "Reset Timer3" diff --git a/radio/src/translations/i18n/en.h b/radio/src/translations/i18n/en.h index e0575ba9838..8e8d69eda7d 100644 --- a/radio/src/translations/i18n/en.h +++ b/radio/src/translations/i18n/en.h @@ -981,7 +981,7 @@ #define TR_PASTE_BEFORE "Paste before" #define TR_DELETE "Delete" #define TR_INSERT "Insert" -#define TR_RESET_FLIGHT "Reset session" +#define TR_RESET_SESSION "Reset session" #define TR_RESET_TIMER1 "Reset timer1" #define TR_RESET_TIMER2 "Reset timer2" #define TR_RESET_TIMER3 "Reset timer3" diff --git a/radio/src/translations/i18n/es.h b/radio/src/translations/i18n/es.h index b865da1ff2e..18e363d5f86 100644 --- a/radio/src/translations/i18n/es.h +++ b/radio/src/translations/i18n/es.h @@ -974,7 +974,7 @@ #define TR_PASTE_BEFORE "Paste Before" #define TR_DELETE "Borrar" #define TR_INSERT "Insertar" -#define TR_RESET_FLIGHT "Reset Vuelo" +#define TR_RESET_SESSION "Reset Vuelo" #define TR_RESET_TIMER1 "Reset Reloj 1" #define TR_RESET_TIMER2 "Reset Reloj 2" #define TR_RESET_TIMER3 "Reset Reloj 3" diff --git a/radio/src/translations/i18n/fi.h b/radio/src/translations/i18n/fi.h index ea8757466cf..a960ec1259e 100644 --- a/radio/src/translations/i18n/fi.h +++ b/radio/src/translations/i18n/fi.h @@ -974,7 +974,7 @@ #define TR_PASTE_BEFORE "Paste Before" #define TR_DELETE "Delete" #define TR_INSERT "Insert" -#define TR_RESET_FLIGHT "Reset Flight" +#define TR_RESET_SESSION "Reset Flight" #define TR_RESET_TIMER1 "Reset Timer1" #define TR_RESET_TIMER2 "Reset Timer2" #define TR_RESET_TIMER3 "Reset Timer3" diff --git a/radio/src/translations/i18n/fr.h b/radio/src/translations/i18n/fr.h index b8c83b1ceb6..3b87599336b 100644 --- a/radio/src/translations/i18n/fr.h +++ b/radio/src/translations/i18n/fr.h @@ -978,7 +978,7 @@ #define TR_PASTE_BEFORE "Coller Avant" #define TR_DELETE "Supprimer" #define TR_INSERT "Insérer" -#define TR_RESET_FLIGHT TR("Réinit. vol", "Réinit. vol") +#define TR_RESET_SESSION TR("Réinit. vol", "Réinit. vol") #define TR_RESET_TIMER1 TR("Réinit. Timer1", "Réinit. Chrono1") #define TR_RESET_TIMER2 TR("Réinit. Timer2", "Réinit. Chrono2") #define TR_RESET_TIMER3 TR("Réinit. Timer3", "Réinit. Chrono3") diff --git a/radio/src/translations/i18n/he.h b/radio/src/translations/i18n/he.h index acd07b7fc38..752e7aabb93 100644 --- a/radio/src/translations/i18n/he.h +++ b/radio/src/translations/i18n/he.h @@ -983,7 +983,7 @@ #define TR_PASTE_BEFORE "הדבק לפני" #define TR_DELETE "מחק" #define TR_INSERT "Insert" -#define TR_RESET_FLIGHT "איפוס טיסה" +#define TR_RESET_SESSION "איפוס טיסה" #define TR_RESET_TIMER1 "איפוס שעון 1 " #define TR_RESET_TIMER2 "איפוס שעון 2" #define TR_RESET_TIMER3 "איפוס שעון 3" diff --git a/radio/src/translations/i18n/it.h b/radio/src/translations/i18n/it.h index 620d14fcebb..6d9839fde6c 100644 --- a/radio/src/translations/i18n/it.h +++ b/radio/src/translations/i18n/it.h @@ -980,7 +980,7 @@ #define TR_PASTE_BEFORE "Incolla Prima" #define TR_DELETE "Elimina" #define TR_INSERT TR("Inser.","Inserisci") -#define TR_RESET_FLIGHT "Azzera volo" +#define TR_RESET_SESSION "Azzera volo" #define TR_RESET_TIMER1 "Azzera Timer1" #define TR_RESET_TIMER2 "Azzera Timer2" #define TR_RESET_TIMER3 "Azzera Timer3" diff --git a/radio/src/translations/i18n/jp.h b/radio/src/translations/i18n/jp.h index 914198ef55f..b3f3296fb96 100644 --- a/radio/src/translations/i18n/jp.h +++ b/radio/src/translations/i18n/jp.h @@ -979,7 +979,7 @@ #define TR_PASTE_BEFORE "前に貼り付け" #define TR_DELETE "削除" #define TR_INSERT "挿入" -#define TR_RESET_FLIGHT "飛行記録リセット" +#define TR_RESET_SESSION "飛行記録リセット" #define TR_RESET_TIMER1 "タイマー1 リセット" #define TR_RESET_TIMER2 "タイマー2 リセット" #define TR_RESET_TIMER3 "タイマー3 リセット" diff --git a/radio/src/translations/i18n/ko.h b/radio/src/translations/i18n/ko.h index 85e43ee61dc..6702d018dc6 100644 --- a/radio/src/translations/i18n/ko.h +++ b/radio/src/translations/i18n/ko.h @@ -1024,7 +1024,7 @@ #define TR_PASTE_BEFORE "앞에 붙여넣기" #define TR_DELETE "삭제" #define TR_INSERT "삽입" -#define TR_RESET_FLIGHT "세션 초기화" +#define TR_RESET_SESSION "세션 초기화" #define TR_RESET_TIMER1 "타이머1 초기화" #define TR_RESET_TIMER2 "타이머2 초기화" #define TR_RESET_TIMER3 "타이머3 초기화" diff --git a/radio/src/translations/i18n/nl.h b/radio/src/translations/i18n/nl.h index a1acd768ba7..4c686ea75ca 100644 --- a/radio/src/translations/i18n/nl.h +++ b/radio/src/translations/i18n/nl.h @@ -976,7 +976,7 @@ #define TR_PASTE_BEFORE "Paste Before" #define TR_DELETE "Verwijderen" #define TR_INSERT "Invoegen" -#define TR_RESET_FLIGHT "Reset Vliegdata" +#define TR_RESET_SESSION "Reset Vliegdata" #define TR_RESET_TIMER1 "Reset Timer1" #define TR_RESET_TIMER2 "Reset Timer2" #define TR_RESET_TIMER3 "Reset Timer3" diff --git a/radio/src/translations/i18n/pl.h b/radio/src/translations/i18n/pl.h index db0c3c8626d..44196a69266 100644 --- a/radio/src/translations/i18n/pl.h +++ b/radio/src/translations/i18n/pl.h @@ -973,7 +973,7 @@ #define TR_PASTE_BEFORE "Wklej przed" #define TR_DELETE "Kasuj" #define TR_INSERT "Wstaw" -#define TR_RESET_FLIGHT "Resetuj sesję" +#define TR_RESET_SESSION "Resetuj sesję" #define TR_RESET_TIMER1 "Zeruj Timer1" #define TR_RESET_TIMER2 "Zeruj Timer2" #define TR_RESET_TIMER3 "Zeruj Timer3" diff --git a/radio/src/translations/i18n/pt.h b/radio/src/translations/i18n/pt.h index a998a5a6866..3dc84bf46fa 100644 --- a/radio/src/translations/i18n/pt.h +++ b/radio/src/translations/i18n/pt.h @@ -981,7 +981,7 @@ #define TR_PASTE_BEFORE "Colar depois" #define TR_DELETE "Apagar" #define TR_INSERT "Inserir" -#define TR_RESET_FLIGHT "Reinic. sessão" +#define TR_RESET_SESSION "Reinic. sessão" #define TR_RESET_TIMER1 "Reset timer1" #define TR_RESET_TIMER2 "Reset timer2" #define TR_RESET_TIMER3 "Reset timer3" diff --git a/radio/src/translations/i18n/ru.h b/radio/src/translations/i18n/ru.h index c3b76d5fcb5..ba7e25e9fab 100644 --- a/radio/src/translations/i18n/ru.h +++ b/radio/src/translations/i18n/ru.h @@ -982,7 +982,7 @@ #define TR_PASTE_BEFORE "Вставить перед" #define TR_DELETE "Удалить" #define TR_INSERT "Вставить" -#define TR_RESET_FLIGHT "Сброс сесии" +#define TR_RESET_SESSION "Сброс сесии" #define TR_RESET_TIMER1 "Сбросить таймер1" #define TR_RESET_TIMER2 "Сбросить таймер2" #define TR_RESET_TIMER3 "Сбросить таймер3" diff --git a/radio/src/translations/i18n/se.h b/radio/src/translations/i18n/se.h index 4e5be13883f..71c295e7c6c 100644 --- a/radio/src/translations/i18n/se.h +++ b/radio/src/translations/i18n/se.h @@ -981,7 +981,7 @@ #define TR_PASTE_BEFORE "Klistra in före" #define TR_DELETE "Radera" #define TR_INSERT "Addera" -#define TR_RESET_FLIGHT "Återställ session" +#define TR_RESET_SESSION "Återställ session" #define TR_RESET_TIMER1 "Återställ timer1" #define TR_RESET_TIMER2 "Återställ timer2" #define TR_RESET_TIMER3 "Återställ timer3" diff --git a/radio/src/translations/i18n/tw.h b/radio/src/translations/i18n/tw.h index d97a0d516fa..8f054faf502 100644 --- a/radio/src/translations/i18n/tw.h +++ b/radio/src/translations/i18n/tw.h @@ -977,7 +977,7 @@ #define TR_PASTE_BEFORE "貼上到本條之前" #define TR_DELETE "刪除" #define TR_INSERT "插入" -#define TR_RESET_FLIGHT "復位飛行數據" +#define TR_RESET_SESSION "復位飛行數據" #define TR_RESET_TIMER1 "重啟計時器1" #define TR_RESET_TIMER2 "重啟計時器2" #define TR_RESET_TIMER3 "重啟計時器3" diff --git a/radio/src/translations/i18n/ua.h b/radio/src/translations/i18n/ua.h index 78525e91523..be05e1c4403 100644 --- a/radio/src/translations/i18n/ua.h +++ b/radio/src/translations/i18n/ua.h @@ -981,7 +981,7 @@ #define TR_PASTE_BEFORE "Вставити до" #define TR_DELETE "Видалити" #define TR_INSERT "Вставити" -#define TR_RESET_FLIGHT "Скинути сесію" +#define TR_RESET_SESSION "Скинути сесію" #define TR_RESET_TIMER1 "Скинути таймер1" #define TR_RESET_TIMER2 "Скинути таймер2" #define TR_RESET_TIMER3 "Скинути таймер3" diff --git a/radio/src/translations/sim_string_list.h b/radio/src/translations/sim_string_list.h index 4a7ff978887..6f2916e7820 100644 --- a/radio/src/translations/sim_string_list.h +++ b/radio/src/translations/sim_string_list.h @@ -849,7 +849,7 @@ #define STR_REPEAT_AT_ZERO currentLangStrings->STR_REPEAT_AT_ZERO #define STR_REPEAT currentLangStrings->STR_REPEAT #define STR_RESET_BTN currentLangStrings->STR_RESET_BTN -#define STR_RESET_FLIGHT currentLangStrings->STR_RESET_FLIGHT +#define STR_RESET_SESSION currentLangStrings->STR_RESET_SESSION #define STR_RESET_SUBMENU currentLangStrings->STR_RESET_SUBMENU #define STR_RESET_TELEMETRY currentLangStrings->STR_RESET_TELEMETRY #define STR_RESET_TIMER1 currentLangStrings->STR_RESET_TIMER1 diff --git a/radio/src/translations/string_list.h b/radio/src/translations/string_list.h index 09600c730fa..6da02ab3d34 100644 --- a/radio/src/translations/string_list.h +++ b/radio/src/translations/string_list.h @@ -848,7 +848,7 @@ STR(RENAME_FILE) STR(REPEAT_AT_ZERO) STR(REPEAT) STR(RESET_BTN) -STR(RESET_FLIGHT) +STR(RESET_SESSION) STR(RESET_SUBMENU) STR(RESET_TELEMETRY) STR(RESET_TIMER1)