FOG not working on Rocky 9.5

[nezzergetti]

Hello!

Just tried to deploy the latest stable version of FOG on a clean Rocky 9.5. Installation fails at remi repo.
However when manually adding Remi Repo the installer works so that was a minor issue but should be noted :)

But when trying to connect with a clean VM (vmware ESXI/vmxnet3) or my Windows PC connected to the same subnet PXE server does not seems to answer.

Windows output:

`C:\Windows\System32>tftp -i 10.0.0.205 get undionly.kpxe
Connect request failed

C:\Windows\System32>tftp -i 10.0.0.205 get snponly.efi
Connect request failed

C:\Windows\System32>`

DHCP options are set in the router and I can see that the options indeed are propegated to the clients when sniffing with wireshark.

I'm new to PXE so maybe I'm missing something fundamental here.

Other things checked:
Firewall (off)
Ping (works)
Selinux (permissive)

[lukebarone]

Could you upload the installation log? It should be located at bin/error_logs/fog_error_VERSION.log from where you ran the installfog.sh script.

[nezzergetti]

Hello!

Oh I'm so sorry, so tierd I uploaded the script and not the log.

Here is the log: https://pastebin.com/6b468LW0

[darksidemilk]

Try installing from the dev-branch or working-1.6 branch, or wait till tomorrow when the dev-branch becomes the stable branch.
This might be related to the ipxe compile issues that were just fixed.

[nezzergetti]

I tried to run the update script but seems to not work :/

+------------------------------------------+
| ..#######:. ..,#,.. .::##::. |
|.:###### .:;####:......;#;.. |
|...##... ...##;,;##::::.##... |
| ,# ...##.....##:::## ..:: |
| ## .::###,,##. . ##.::#.:######::.|
|...##:::###::....#. .. .#...#. #...#:::. |
|..:####:.. ..##......##::## .. # |
| # . ...##:,;##;:::#: ... ##.. |
| .# . .:;####;::::.##:::;#:.. |
| # ..:;###.. |
| |
+------------------------------------------+
| Free Computer Imaging Solution |
+------------------------------------------+
| Credits: http://fogproject.org/Credits |
| http://fogproject.org/Credits |
| Released under GPL Version 3 |
+------------------------------------------+

• Checking running version....................................Done
• Running FOG Version: 1.5.10.1639

---

•                     ** Notice **                        *
  

---

•                                                         *
  

• Your FOG server may go offline during this upgrade process! *

•                                                         *
  

---

• Checking latest version.....................................Done
• Latest FOG Version: 1.5.10.1650
  You are not running the latest stable version
• Preparing to upgrade
• Attempting to download latest stable to /opt/
• Trying mirror http://internap.dl.sourceforge.net/sourceforge/freeghost/
• Attempting Download.........................................Failed
• Trying mirror http://voxel.dl.sourceforge.net/sourceforge/freeghost/
• Attempting Download.........................................Failed
• Trying mirror http://kent.dl.sourceforge.net/sourceforge/freeghost/
• Attempting Download.........................................Failed
• Trying mirror http://heanet.dl.sourceforge.net/sourceforge/freeghost/
• Attempting Download.........................................Failed
  Failed to download current file

[darksidemilk]

What update script are you running? I don't recognize those mirrors.

[nezzergetti]

What update script are you running? I don't recognize those mirrors.

I'm running the script included in the package at: https://github.com/FOGProject/fogproject/releases/tag/1.5.10.1650 Under utils folder.

[rluzuriaga]

@nezzergetti I haven't been around in the project for too long but as far as I know, that is a super old script that is not being maintained.
The correct way to update FOG is by re-running the installfog.sh script. Make sure to run it with sudo.