Full Length Metal Rack Mount – Success!

[connorshinn]

Just wanted to make a quick post to thank you for providing all the STEP files and instructions to mount the JetKVM! I ended up going with the full width 1U metal plate, and think it turned out pretty well. Including a few pictures below.

I ended up using slightly different materials than what is listed in the repository, so wanted to pass along the specifics in case it's helpful for someone downstream:

Front Plate:

• Purchased via SendCutSend
• Material: CRS A36/1008 Mild Steel (.059")
• Finish: Powder coating (matte black)
• Total cost: $28.56 ($36.78 after tax/shipping)

JetKVM Module:

• Purchased via Fictiv
• Process: Multi Jet Fusion (MJF)
• Material: PA12 glass beads (Black)
• Finish: Vapor smoothing
• Other: Heatset insert installation (note: I don't have a soldering iron so picked Fictiv specifically because they were able to add the required inserts). Here's a link to the "drawing" (i.e., glorified screenshot) that I uploaded per their request: Inserts to be Added (1).pdf
• Total Cost: $97.59 (note: I could probably have brought the cost down to around ~$50 by selecting different materials / doing the inserts myself)

Thanks again to @JaredC01 for making this a possibility!