After Update to 0.1.7 several Layer Shft

[Atlas1O8]

Update I checked the tension of the x and y axis belts and verified the adhesion of the piece to the bed. I changed the printer.cfg run_current value to 0.8 for the x and y axes. The print tower Like any other print it fails. The first layer test is perfect. The surface is perfectly level.

Layer shift

[FLO-sys-ctrl]

I had the same Problem. But i set my Stepper Current wrong cause its my first Instalation. Are you sure the Current is correctly? For Neptune 4 Pro the newer Version 1.2A.

[hkhov]

I have the exact same issue. Layer shift start from the second layer. I restored back to V0.1.5 and I have no layer shift. I am using the same printer cfg on both version I tested and printed with the exact same gcode. The only change is going from V0.1.7 back to 0.1.5 that was installed on another eMMC

[Atlas1O8]

#368 (comment)

Thanks everyone, I solved it by changing the run_current values