From 854e9b85f2d53927d371f852f82a6bd49b47b7d9 Mon Sep 17 00:00:00 2001 From: burkfers <6268175+burkfers@users.noreply.github.com> Date: Wed, 23 Jul 2025 12:05:28 +0200 Subject: [PATCH] fix usermods readme removed removed Micron+ fixed all links to be relative - some were broken added trailing pipes in markdown table --- Mods/README.md | 79 +++++++++++++++++++++++++------------------------- 1 file changed, 40 insertions(+), 39 deletions(-) diff --git a/Mods/README.md b/Mods/README.md index 78c5da45..cdd35317 100644 --- a/Mods/README.md +++ b/Mods/README.md @@ -6,6 +6,7 @@ Remember to update this README when uploading new mod! ## Table structure Update the following table with the information about your mod: + - Your name - A link to your sub-folder - A short description of your mod @@ -18,54 +19,54 @@ like so: | Creator | Mod title | Description | | --- | --- | --- | -|Asica10|[Z_idler](https://github.com/Asica10/Micron/tree/main/Mods/Asica10/Z_idler) | Z idler carriage adjusted for 15mm toothed idler / Z idler body with wires cutout. -||[Crazy_Ivan_double_shear](https://github.com/Asica10/Micron/tree/main/Mods/Asica10/Crazy_Ivan_double_shear) | Crazy Ivan for double shear stepper shaft. -|LordKillZone|[3010_Side_Bedfans] (https://github.com/printersforants/Micron/tree/main/Mods/LordkillZone/Side_3010_bedfans) | Bedfans mount for 3010 blower. Side mount under bed -|BlueSandBox|[Nema_17_Z_Motor_Mount](https://github.com/printersforants/Micron/tree/main/Mods/BlueSandBox/Nema_17_Z_Motor_Mount) | Replaces the Nema14s with Nema17s -|clee|[Micron+](https://github.com/printersforants/Micron/tree/main/Mods/clee) | Micron+ -|Finn2708|[Dual_MGN7_Toolhead_Carriage](https://github.com/printersforants/Micron/tree/main/Mods/Finn2708/Dual_MGN7_Toolhead_Carriage) | Dual MGN7H Toolhead Carriage -||[Zerofilter_mounting_bracket](https://github.com/printersforants/Micron/tree/main/Mods/Finn2708/Zerofilter_mounting_bracket) | Mounting bracket for Zerofilter -||[AB_Motor_Microfit_Connector](https://github.com/printersforants/Micron/tree/main/Mods/Finn2708/AB_Motor_Microfit_Connector) | AB Motor Microfit Connector -|Hartk|[MicroDOOM CAD](https://github.com/printersforants/Micron/tree/main/Mods/Hartk) | Zipped up CAD for MicroDOOM. -||[Pin Mod](https://github.com/printersforants/Micron/tree/main/Mods/Hartk/Pin_Mod/) | Pin Mod for Micron. -||[Spinner](https://github.com/printersforants/Micron/tree/main/Mods/Hartk/Spinner) | Spinner for Micron A/B drives. -||[LRS-150-Stacked](https://github.com/printersforants/Micron/tree/main/Mods/Hartk/LRS-150-Stacked) | Stacked electronics for LRS-150 PSU and octopus. -||[bed_wagos](https://github.com/printersforants/Micron/tree/main/Mods/Hartk/bed_wagos) | Bed wagos -|L.e.o.p.a.r.d|[Clips](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/Clips) | This mod contains various clips for mounting things onto 1515 and 2020 extrusion. -||[EasierZDrives](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/EasierZDrives) | Alternate Z Drives -||[FrenzyCarriage](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/FrenzyCarriage) | Alternate Carriage for Micron and other 1515 MGN9C machines. -||[Firmware](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/Firmware) | Leopard's labeled wiring photos/examples, and mainsail config (with auto-z-calibration and sensorless X/Y) -||[HeatsetZTensioner](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/HeatsetZTensioner) | Alternate Z Idler that can utilize a heatset -||[KeyedSkirts](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/KeyedSkirts) | Keyed Skirts -||[KineKlicky](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/KineKlicky) | Kinetic-mount Klicky, useful if you're having some issues with your klicky -||[M3MicronFeetAdapter](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/M3MicronFeetAdapter) | This mod contains a hex-nut-adapter that allows you to use the standard z-drive baseplate, but install something with an M3 screw (e.g. V0 feet). -||[PiCameraMountFor1515](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/PiCameraMountFor1515) | This mod contains a mount compatible with a standard Pi camera. It articulates in various ways, and is mountable in various directions. -||[RibbitToolhead](https://github.com/printersforants/Micron/tree/main/Mods/L.e.o.p.a.r.d/RibbitToolhead) | An alternate toolhead which puts the part cooling fans on external "legs", which might improve cooling and possibly give more 'x' clearance for your gantry. -|Reiten966|[Micron Handles](https://github.com/printersforants/Micron/tree/main/Mods/Reiten966/Micron_Handles) | Handles for Micron -|TheWarolf|[Neopixel_Mount](https://github.com/printersforants/Micron/tree/main/Mods/TheWarolf/UglyNeopixelMount) | Simple Neopixel strip mount for 1515 extrusions -||[Anti_Rotation_Corners](https://github.com/printersforants/Micron/tree/main/Mods/TheWarolf/AntiRotationCorners) | Modified bed support extrusion corner pieces +|Asica10|[Z_idler](./Asica10/Z_idler) | Z idler carriage adjusted for 15mm toothed idler / Z idler body with wires cutout. | +||[Crazy_Ivan_double_shear](./Asica10/Crazy_Ivan_double_shear) | Crazy Ivan for double shear stepper shaft. | +|LordKillZone|[3010_Side_Bedfans](./LordKillZone/Side_3010_bedfans) | Bedfans mount for 3010 blower. Side mount under bed | +|BlueSandBox|[Nema_17_Z_Motor_Mount](./BlueSandBox/Nema_17_Z_Motor_Mount) | Replaces the Nema14s with Nema17s | +|Finn2708|[Dual_MGN7_Toolhead_Carriage](./Finn2708/Dual_MGN7_Toolhead_Carriage) | Dual MGN7H Toolhead Carriage | +||[Zerofilter_mounting_bracket](./Finn2708/Zerofilter_mounting_bracket) | Mounting bracket for Zerofilter +||[AB_Motor_Microfit_Connector](./Finn2708/AB_Motor_Microfit_Connector) | AB Motor Microfit Connector +|Hartk|[MicroDOOM CAD](./hartk1213/MicroDOOM/CAD/) | Zipped up CAD for MicroDOOM. | +||[Pin Mod](./hartk1213/Pin_Mod/) | Pin Mod for Micron. | +||[Spinner](./hartk1213/Spinner) | Spinner for Micron A/B drives. | +||[LRS-150-Stacked](./hartk1213/LRS-150-Stacked) | Stacked electronics for LRS-150 PSU and octopus. | +||[bed_wagos](./hartk1213/bed_wagos) | Bed wagos | +|L.e.o.p.a.r.d|[Clips](./L.e.o.p.a.r.d/Clips) | This mod contains various clips for mounting things onto 1515 and 2020 extrusion. | +||[EasierZDrives](./L.e.o.p.a.r.d/EasierZDrives) | Alternate Z Drives | +||[FrenzyCarriage](./L.e.o.p.a.r.d/FrenzyCarriage) | Alternate Carriage for Micron and other 1515 MGN9C machines. | +||[Firmware](./L.e.o.p.a.r.d/Firmware) | Leopard's labeled wiring photos/examples, and mainsail config (with auto-z-calibration and sensorless X/Y) | +||[HeatsetZTensioner](./L.e.o.p.a.r.d/HeatsetZTensioner) | Alternate Z Idler that can utilize a heatset | +||[KeyedSkirts](./L.e.o.p.a.r.d/KeyedSkirts) | Keyed Skirts | +||[KineKlicky](./L.e.o.p.a.r.d/KineKlicky) | Kinetic-mount Klicky, useful if you're having some issues with your klicky | +||[M3MicronFeetAdapter](./L.e.o.p.a.r.d/M3MicronFeetAdapter) | This mod contains a hex-nut-adapter that allows you to use the standard z-drive baseplate, but install something with an M3 screw (e.g. V0 feet). | +||[PiCameraMountFor1515](./L.e.o.p.a.r.d/PiCameraMountFor1515) | This mod contains a mount compatible with a standard Pi camera. It articulates in various ways, and is mountable in various directions. | +||[RibbitToolhead](./L.e.o.p.a.r.d/RibbitToolhead) | An alternate toolhead which puts the part cooling fans on external "legs", which might improve cooling and possibly give more 'x' clearance for your gantry. | +|Reiten966|[Micron Handles](./Reiten966/Micron_Handles) | Handles for Micron | +|TheWarolf|[Neopixel_Mount](./TheWarolf/UglyNeopixelMount) | Simple Neopixel strip mount for 1515 extrusions | +||[Anti_Rotation_Corners](./TheWarolf/AntiRotationCorners) | Modified bed support extrusion corner pieces | | xbst_ | [2-Piece Skirt Display Mount](./xbst_/2_Piece_Skirt_Display_Mount) | A simple insert for the middle hex of the front skirts to mount a display using the stock mount. | || [Drag Chain Chamber Thermistor](./xbst_/Dragchain_Thermistor) | A thermistor mount on the drag chain guide (for chamber temperature monitoring). | || [LED Mount](./xbst_/LED_Mount) | Top LED mount for PCB LED strips with M3 holes. | || [Vertical Pi](./xbst_/Vertical_Pi) | Relocates the Pi, eliminating the risk of the bottom panel shorting the pins, and makes accessing GPIO easier. Also adds a second latch for the hinge. | || [Simpler Electronics](./xbst_/Simpler_Electronics) | No-hinge electronics mounts for the UHP PSU, BTT Octopus & Pi. Pi Mounts to a skirt, UHP and octopus are stacked. | -|Maker Technologies|[RRF Config](https://github.com/printersforants/Micron/tree/main/Mods/Maker%20Technologies/RRF%20Firmware) | Rerprap Firmware Config for use with Duet Web Control -|gfunnymoney|[MicronPlusDinRailMount](https://github.com/PrintersForAnts/Micron/tree/main/Mods/gfunnymoney/MicronPlusDinRailMount) | Micron+ DIN rail mount -||[MicronSideSkirtKeystonePort](https://github.com/PrintersForAnts/Micron/tree/main/Mods/gfunnymoney/MicronSideSkirtKeystonePort) | Keystone side skirt Micron 120. -|CoookieTM|[OwO Chef Bolt](https://github.com/PrintersForAnts/Micron/tree/main/Mods/CoookieTM/OwO%20chef%20bolt) | Easier to print Z endstop housing -||[PIP Inner Access Z Chain](https://github.com/PrintersForAnts/Micron/tree/main/Mods/CoookieTM/PIP%20inner%20access%20z%20chain) | Print in Place Z Chain -||[Aesthetic No-Panel Clips](https://github.com/PrintersForAnts/Micron/tree/main/Mods/CoookieTM/aesthetic%20panel%20clips) | Aesthetic clips for use with NO panels -||[B Motor Ziptie Mount](https://github.com/PrintersForAnts/Micron/tree/main/Mods/CoookieTM/b%20motor%20tail%20mount) | Add-on to provide a ziptie mounting point -||[Beefed Up Side Mount Handle](https://github.com/PrintersForAnts/Micron/tree/main/Mods/CoookieTM/beefy%20handle) | Handle that is NOT compatible with panels -||[Z Motor Spinner Flags](https://github.com/PrintersForAnts/Micron/tree/main/Mods/CoookieTM/fixed%20spinner) | Rock how gangster your micron is -||[Larger Z Belt Covers](https://github.com/PrintersForAnts/Micron/tree/main/Mods/CoookieTM/larger%20z%20belt%20covers) | Covers gaps in the bottom panel -||[Spool Mount with Rollers](https://github.com/PrintersForAnts/Micron/tree/main/Mods/CoookieTM/rolling%20spool%20mount) | Reduces friction for spools -|risqy|[Micron+ 4010 Bed Fans](https://github.com/printersforants/Micron/tree/main/Mods/risqy/Micron-Plus-Bed-Fans) | Micron+ Bed Fan Mount for 2x 4010 Blower -|Shix|[MicronPlus mini12864 front skirt Mount](https://github.com/PrintersForAnts/Micron/tree/main/Mods/Shix/MicronPlus%20mini12864%20front%20skirt%20mount) | Mounting Options for the mini12864 for the front skirt of the Micron+ +|Maker Technologies|[RRF Config](./Maker%20Technologies/RRF%20Firmware) | Rerprap Firmware Config for use with Duet Web Control | +|gfunnymoney|[MicronPlusDinRailMount](./gfunnymoney/MicronPlusDinRailMount) | Micron+ DIN rail mount | +||[MicronSideSkirtKeystonePort](./gfunnymoney/MicronSideSkirtKeystonePort) | Keystone side skirt Micron 120. | +|CoookieTM|[OwO Chef Bolt](./CoookieTM/OwO%20chef%20bolt) | Easier to print Z endstop housing | +||[PIP Inner Access Z Chain](./CoookieTM/PIP%20inner%20access%20z%20chain) | Print in Place Z Chain | +||[Aesthetic No-Panel Clips](./CoookieTM/aesthetic%20panel%20clips) | Aesthetic clips for use with NO panels | +||[B Motor Ziptie Mount](./CoookieTM/b%20motor%20tail%20mount) | Add-on to provide a ziptie mounting point | +||[Beefed Up Side Mount Handle](./CoookieTM/beefy%20handle) | Handle that is NOT compatible with panels | +||[Z Motor Spinner Flags](./CoookieTM/fixed%20spinner) | Rock how gangster your micron is | +||[Larger Z Belt Covers](./CoookieTM/larger%20z%20belt%20covers) | Covers gaps in the bottom panel | +||[Spool Mount with Rollers](./CoookieTM/rolling%20spool%20mount) | Reduces friction for spools | +|risqy|[Micron+ 4010 Bed Fans](./risqy/Micron-Plus-Bed-Fans) | Micron+ Bed Fan Mount for 2x 4010 Blower | +|Shix|[MicronPlus mini12864 front skirt Mount](./Shix/MicronPlus%20mini12864%20front%20skirt%20mount) | Mounting Options for the mini12864 for the front skirt of the Micron+ | |G|[1515 Bed Angle Bracket (Notched)](./G/1515%20Bed%20Angle%20Bracket%20Notched) | Notched bed angle bracket for R1 Micron Filter | ||[1515 BTT SFS Mount](./G/1515%20BTT%20SFS%20Mount) | BTT Smart Filament Sensor Mount based on the bowden tube holder | ||[1515 Daygreen 5VDC Voltage Regulator Mount](./G/1515%20Daygreen%205VDC%20Regulator%20Mount) | Low profile for Micron bay mounting of the Daygreen 5VDC Voltage Regulator | ||[Bowden Tube Holder (Extended)](./G/Bowden%20Tube%20Holder%20Extended) | Extended Micron bowden tube holder to fit the R1 top panel with 3mm foam | ||[More WAGO Mounts](./G/More%20WAGO%20Mounts) | Additional wago mounts based on the micron 1515 mount for two five-port and two three-port configurations | ||[Zip Tie and PCB DIN Clip](./G/Zip%20Tie%20and%20PCB%20DIN%20Clip) | Modified PCB DIN Clip to add zip tie holes | + ---