Releases: Timocop/PSMoveServiceEx-Virtual-Device-Manager
PSMS-EX Virtual Device Manager v8.3
Changes in this version:
-
Fixed yaw correction not being applied correctly.
-
Fixed not properly detecting owoTrack protocol.
-
Fixed battery reader for owoTrack and SlimeVR.
-
Fixed reading magnetometer correction as normal rotation vector.
-
Fixed SteamVR driver installation exceptions.
-
Added Anti-Virus warning when installing PlayStation Eye driver.
-
Start/Stop pose stream whenever needed.
This pose stream will now stop when it's not needed anymore. For example, clickingPause OSC ServerinVirtual Motion Tracker. -
Removed unneeded protocol checks.
-
Make pose valid with either position or orientation available.
ℹ️ Important Notice
ℹ️ Virtual Device Manager will slowly replace PSMoveService VRBridge!
With Virtual Device Manager, you can use your PSMove controller as a controller, HMD 6-DoF replacement, or full-body solution!
In the future more devices will be supported.
⚠️ The SteamVR driver is only compatible withPSMoveSerivceEx v0.19.1and higher!Using this version on an older version can cause problems with emulated lighthouses due to CAPI protocol changes.
⚠️ Anti-Virus false positives when installing Playstation Eye driver!Because Playstation Eyes need a special driver for Windows, you need to install an open-source unsigned driver called libusb. Because the driver is unsigned, some Anti-Virus vendors might see this as a malicious act and flag Virtual Device Manager while installing the driver. This is a false positive! Please whitelist the Virtual Device Manager folder to avoid this problem!
PSMS-EX Virtual Device Manager v8.2
Changes in this version:
-
Fixed and improve Libusb Playstation Eye driver installation.
-
Implemented PSMove controller haptic feedback.
ℹ️ Controller haptic feedback can be enabled/disabled in the settings.
⚠️ Controller haptic feedback can reduce the battery life greatly! -
Added
Start Socket,Start OSC ServerandPause OSC Servershortcut on the navigation bar. -
Added
Launch SteamVRshortcut to the navigation bar. -
Fixed application shutdown delay.
-
UI changes.
ℹ️ Important Notice
ℹ️ Virtual Device Manager will slowly replace PSMoveService VRBridge!
With Virtual Device Manager, you can use your PSMove controller as a controller, HMD 6-DoF replacement, or full-body solution!
In the future more devices will be supported.
⚠️ The SteamVR driver is only compatible withPSMoveSerivceEx v0.19.1and higher!Using this version on an older version can cause problems with emulated lighthouses due to CAPI protocol changes.
⚠️ Anti-Virus false positives when installing Playstation Eye driver!Because Playstation Eyes need a special driver for Windows, you need to install an open-source unsigned driver called libusb. Because the driver is unsigned, some Anti-Virus vendors might see this as a malicious act and flag Virtual Device Manager while installing the driver. This is a false positive! Please whitelist the Virtual Device Manager folder to avoid this problem!
PSMS-EX Virtual Device Manager v8.1
Changes in this version:
- Able to change Service path.
- Added quick links to GitHub.
- Show Service path as tooltip on hover over link label.
- Improved old VDM SteamVR driver detection.
ℹ️ Important Notice
ℹ️ Virtual Device Manager will slowly replace PSMoveService VRBridge!
With Virtual Device Manager, you can use your PSMove controller as a controller, HMD 6-DoF replacement, or full-body solution!
In the future more devices will be supported.
⚠️ The SteamVR driver is only compatible withPSMoveSerivceEx v0.19.1and higher!Using this version on an older version can cause problems with emulated lighthouses due to CAPI protocol changes.
PSMS-EX Virtual Device Manager v8.0
Changes in this version:
- Implemented Playstation Eye Camera driver installation/uninstallation via UI.
- UI Changes.
- Detect old VDM SteamVR drivers and remove them.
- Able to Start/Restart/Stop PSMoveServiceEx via UI.
- Able to run PSMoveServiceEx Config Tool via UI.
- Able to factory reset PSMoveServiceEx via UI.
- Removed annoying startup MessageBoxes when PSMS-EX configs are not available.
ℹ️ Important Notice
ℹ️ Virtual Device Manager will slowly replace PSMoveService VRBridge!
With Virtual Device Manager, you can use your PSMove controller as a controller, HMD 6-DoF replacement, or full-body solution!
In the future more devices will be supported.
⚠️ The SteamVR driver is only compatible withPSMoveSerivceEx v0.19.1and higher!Using this version on an older version can cause problems with emulated lighthouses due to CAPI protocol changes.
PSMS-EX Virtual Device Manager v7.1.2
Hotfix
- Fixed
Virtual Motion Trackertrackers freezing every 10 seconds due to base station spawn logic being faulty. - Fixed some other potential issues.
EDIT: Added missing SteamVR driver...
ℹ️ Important Notice
ℹ️ Virtual Device Manager will slowly replace PSMoveService VRBridge!
With Virtual Device Manager, you can use your PSMove controller as a controller, HMD 6-DoF replacement, or full-body solution!
In the future more devices will be supported.
⚠️ The SteamVR driver is only compatible withPSMoveSerivceEx v0.19.1and higher!Using this version on an older version can cause problems with emulated lighthouses due to CAPI protocol changes.
PSMS-EX Virtual Device Manager v7.1.1
Hotfix
- Added missing DLLs.
- Fixed
Disable Base Station spawningnot loading.
(i swear, this always happens)
ℹ️ Important Notice
ℹ️ Virtual Device Manager will slowly replace PSMoveService VRBridge!
With Virtual Device Manager, you can use your PSMove controller as a controller, HMD 6-DoF replacement, or full-body solution!
In the future more devices will be supported.
⚠️ The SteamVR driver is only compatible withPSMoveSerivceEx v0.19.1and higher!Using this version on an older version can cause problems with emulated lighthouses due to CAPI protocol changes.
PSMS-EX Virtual Device Manager v7.1
Changes in this version:
- Able to disable Base Station spawning to free more device slots.
⚠️ Spawning Base Stations take up device slots and currently, SteamVR only supports a maximum of 16 devices.
If you use a lot of devices, disable Base Station spawning to free up slots for trackers.
Exceeding 16 devices may cause devices not to be detected in games!
ℹ️ Important Notice
ℹ️ Virtual Device Manager will slowly replace PSMoveService VRBridge!
With Virtual Device Manager, you can use your PSMove controller as a controller, HMD 6-DoF replacement, or full-body solution!
In the future more devices will be supported.
⚠️ The SteamVR driver is only compatible withPSMoveSerivceEx v0.19.1and higher!Using this version on an older version can cause problems with emulated lighthouses due to CAPI protocol changes.
PSMS-EX Virtual Device Manager v7.0
Changes in this version:
-
Implemented VMT-EX (Modified Virtual Motion Tracker) with HTC emulation.
ℹ️ The SteamVR driver is shipping with this release. -
Major UI changes.
-
Fixed issues when adding custom SteamVR tracker overrides.
ℹ️ Important Notice
ℹ️ Virtual Device Manager will slowly replace PSMoveService VRBridge!
With Virtual Device Manager, you can use your PSMove controller as a controller, HMD 6-DoF replacement, or full-body solution!
In the future more devices will be supported.
⚠️ The SteamVR driver is only compatible withPSMoveSerivceEx v0.19.1and higher!Using this version on an older version can cause problems with emulated lighthouses due to CAPI protocol changes.
PSMS-EX Virtual Device Manager v6.0
Changes in this version:
-
Implemented
Virtual Motion Tracker(VMT) OSC protocol.
ℹ️ This will slowly replace PSMoveService VRBridge. Download VMT here.
⚠️ Currently only PSmove and virtual controllers (with PSmove emulation) are supported. More is coming in the future! -
Implemented
PSMoveSerivceEx-CAPIto communicate with PSMoveServiceEx.
PSMoveServiceEx in SteamVR using VMT Demo
(Quest 1 as HMD and PSmove as controllers)
https://gfycat.com/fixedcolorlessconch
PSMS-EX Virtual Device Manager v5.3
Changes in this version:
- Added remote device timeout warning.
- Connected remote device count will now be displayed.
- Minor GUI changes.

