quick_start_pi_image.MD

How to create a Raspberry Pi image for TronView

1. Download and install the pi imager to create an image of the latest Raspberry Pi OS.

2. Choose Pi 4 or 5. Which ever pi you have.

3. Choose Raspberry Pi OS (64-bit) Debian Bookworm. (desktop)

4. Choose a storage device. Select the SD card you want to install the image to. Then click Next.

5. Choose advanced options.

• Set a hostname (optional)
• Enable SSH
• Set a username and password (this will be your pi login
• setup wifi (required!) You need to setup wifi before writing the image to the SD card. so you can continue with installing TronView.
• Set timezone (recommended)

6. Click Write. This will take a while. It will create a new SD card image.

Then you can continue with installing TronView.

Manually setup wifi using raspi-config.

If you don't setup wifi in the imager, you can do it manually with raspi-config after you boot the pi.

If you want to do it manually, here is the link: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md

Auto login to the pi console

Enter the command sudo raspi-config

• System Options, Scroll down to S5 Select Boot AutoLogin Console Autologin

• select B2 Console Autologin.

• Enter, then then TAB down to Select and Enter, Then Finish, then exit the configuration

• Select Reboot.