A10 TACAN return not corectly work

[Freyr86]

Sur le TACAN du A10 pour le régulage des diuène et de unitée cela fonction jusqu'a 0.9 mais passer a 10 le retour revien a 0.0.

On the TACAN of the A10 for customs and unit adjustment this works up to 0.9 but going to 10 the return comes back to 0.0.

[fdamstra]

TACAN in the A-10 has frustrated me for awhile. I finally have something that works:

For "Tens" (00 - 12):
Button ID: 3001
Device ID: 74
DCS ID: 256
Increment by Value: 1 for the increase button, -1 for the decrease button
Min: 0
Max: 1

Title text change:
DCS ID: 256
Map Value to display text: Cut and paste the following:

0.0=TCN (TENS)
0,0.1=TCN (TENS)
1,0.2=TCN (TENS)
2,0.3=TCN (TENS)
3,0.4=TCN (TENS)
4,0.5=TCN (TENS)
5,0.6=TCN (TENS)
6,0.7=TCN (TENS)
7,0.8=TCN (TENS)
8,0.9=TCN (TENS)
9,1.0=TCN (TENS)
10,1.1=TCN (TENS)
11,1.2=TCN (TENS)
12

For Ones:
Button ID: 3002
Device ID: 74
DCS ID: 257
Increment by Value: 1 (or -1)
Min: 0
Max: 1

Title Text Change:
DCS ID: 257
Map Value to Display Text:

0.00=TCN (ONES)
0,0.10=TCN (ONES)
1,0.20=TCN (ONES)
2,0.30=TCN (ONES)
3,0.40=TCN (ONES)
4,0.50=TCN (ONES)
5,0.60=TCN (ONES)
6,0.70=TCN (ONES)
7,0.80=TCN (ONES)
8,0.90=TCN (ONES)
9

I don't pretend to understand why it works when the inc/dec should clearly be 0.1, but it does.

[Freyr86]

Great it works well for me as well play.

Did you have a problem on the A10-C II with the UHF ARC 210 module?

The value incrementation buttons work correctly but the value is not returned so the incrementation is done exponentially and it is impossible to change that.