1.3RC47m - Smart Audio 2.0 doesn't go to 25mw on low power when disarmed #17
Description
Flashed a V2 KISS FC with 1.3RC47m and found out the VTX doesn't go to 25mW.
Using a Rush Tank Plus VTX that uses Smart Audio 2.0.
Have the VTX section set to TBS Unify Pro and low power at 25mW.
As soon as I plug the quad in, the VTX power light is yellow (200mW), should be green (25mW).
The Rush Tank VTX units correspond with the following lights for each power level.
Green - 25mW
Yellow - 200mW
Red - 500mW
Purple - 800mW
Please check into this.
The smart audio wire coming off the Rush Tank VTX is wired to UART5 (TX5) and is set to VTX in the serial port in the GUI.
Have not tired putting the low power part down at 0mW to see if that will do it or not.
Will report back if that changes anything or not but this should work without any issues.
Thanks