Getting mcuSbcFinError in General Error

[BhavaySen]

@foxBMS Team,

I'm getting the error "General Error" on CAN diag Message. When getting into it I found that this is due to the mcuSbcFinError. I tried but unable to find the source and reasons for this error. Please share some guidance on how to resolve this.

Regards,
Bhavay Sen

[TaijiSugiyama1]

Could be input frequency synchronization error to the SBC. Are you applying an external frequency to the FIN pin of the SBC?

[BhavaySen]

Could be input frequency synchronization error to the SBC. Are you applying an external frequency to the FIN pin of the SBC?

Found it, Its a bug.

In the configuration, the structure sets the fin used = false, finState = STD_NOT_OK. and in the SBC path check function only checks and mark as STD OK in the first POR_RST reason and if (finUsed == true).

Other all uses the SBC init data from FRAM (nvram). and shows the GeneralError.

Same with the SBC PER Initialization. No code, No settings are written in the code.
@foxBMS PER SBC needs the initialization? or foxBMS team missed to initialize it. Might be a bug.