Repeaters altitude on APRS

[hb9esa]

Hello all,

I use ircddbgateway on a virtual server and I have two repeaters in different locations.

In the ircddbgateway configuration file, you can enter the gps position, frequency, description and altitude for each repeater.

The position and frequency are correctly reported on the APRS for each relay, but the altitude reported for relays 1 and 2 is the same (the altitude for relay 1 is always used for both).

The parameter agl1 is sent for both relays, whereas I have different information on agl1 and agl2.

Have you ever noticed this problem?

Thank you