-
|
GEPRC Vapor QUAD, DJI O4Pro into Goggles3. Was fully working on Betaflight, full display, no wiring alterations so TX/RX is correct. No OSD since loading iNAV. aware of and have used Goggles3 setting for iNAV as OS. iNAV Config has OSD set. (DJI OSD works) On OSD page have tried every option as to setting display type, nothing works on any. Aware of a Betaflight fix some have used to manually set displayport, but iNAV does not offer that command. Also there is no MSP+Displayport option in the Ports peripherals options, only Displayport. How do I regain FC generated OSD in Goggles3 please?? |
Beta Was this translation helpful? Give feedback.
Replies: 3 comments
-
|
I suggest you look at some guides for setting up DJI in INAV. It is not the same as BetaFlight. It is much simpler. In ports, don't enable MSP. Just set MSP DisplayPort as the peripheral. Then on the OSD page, select the correct display type. That's pretty much it. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for reply. I have only set peripherals to Displayport (and tried various rates) I have OSD button set on the iNAV Config page I have tried EVERY option on OSD page display type (and power cycled between to be sure!) although you can hear/see the quad respond to a change live. I have experimented with Goggles3 settings. The Betaflight/iNAV OS switch is due the dissimilar font, yes? Its set iNAV in Goggles3. (BF does not work either, even with a corrupted font) Incidentally I then found out that this setting is GLOBAL, not as one would hope/expect model specific, so when I went back to a Betaflight quad, the font was wrong until this was manually changed back. That's annoying as its deep in the menu tree. I have found numerous instances of others having the same issue with iNAV OSD under DJI Goggles3, none so far showing a clear result. Some have said its worked with AVATAR, some with DJIWTF, some with DJINative, there is NO single concensus it seems! |
Beta Was this translation helpful? Give feedback.
-
|
SOLVED - went through it all again, selecting every setting and choosing it again but not changing anything, and it worked |
Beta Was this translation helpful? Give feedback.
SOLVED - went through it all again, selecting every setting and choosing it again but not changing anything, and it worked