From 6bfb3ec12477fdc880069b4c45df97c6b376c121 Mon Sep 17 00:00:00 2001 From: jctk <52247294+jctk@users.noreply.github.com> Date: Tue, 30 Dec 2025 17:19:19 +0900 Subject: [PATCH] SVBONY PowerBox documentation: Added instructions for handling connection issues with the SV241 Pro in Ekos. --- .../docs/auxiliaries/svbony/svbony-powerbox/svbony-powerbox.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/content/docs/auxiliaries/svbony/svbony-powerbox/svbony-powerbox.md b/src/content/docs/auxiliaries/svbony/svbony-powerbox/svbony-powerbox.md index b64b93b..df73362 100644 --- a/src/content/docs/auxiliaries/svbony/svbony-powerbox/svbony-powerbox.md +++ b/src/content/docs/auxiliaries/svbony/svbony-powerbox/svbony-powerbox.md @@ -37,6 +37,8 @@ The following controls are available with the INDI driver: As mentioned earlier, if there are devices connected to the SV241 Pro, you must start the SV241 Pro INDI driver and connect it before those devices. To do this, open the Profile Scripts Editor from the [Scripts] button in the lower right corner of Ekos' Profile Editor and set a wait time to control the execution order of the SV241 Pro. +If the SV241 Pro remains unconnected after Ekos [Start], turn off “Auto-connect” in the profile settings. Then, ensure no other drivers are connected and select an available port in the SV241 Pro's “Connection” section. After that, execute Ekos [Disconnect] and [Stop] to completely terminate all drivers, then restart Ekos [Start]. + ### Settings in Profile Script Editor 1. Add one rule using [Add Rule].