No change after upgrade mod firmware #3
Description
No change after upgrade mod firmware
Here is the log :
┌──(dany㉿kali)-[~/Downloads/TPLINK - XZ000-G3/tprepack-master]
└─$ sudo make
[sudo] password for dany:
[tprepack] CC tprepack
┌──(dany㉿kali)-[~/Downloads/TPLINK - XZ000-G3/tprepack-master]
└─$ sudo unpack
sudo: unpack: command not found
┌──(dany㉿kali)-[~/Downloads/TPLINK - XZ000-G3/tprepack-master]
└─$ make unpack
sudo sh extract_rootfs.sh
Using file: ./input.bin
Checking image type...
hexdump: result_orig.bin: No such file or directory
hexdump: all input file arguments failed
Detected full dump!
3670016+0 records in
3670016+0 records out
3670016 bytes (3.7 MB, 3.5 MiB) copied, 3.90271 s, 940 kB/s
WARNING: Extracting will take some time, please be patient
During process you will be asked for a password, this is due to unsquashfs cannot fully extract image without root
Looking for Squashfs image...Please wait
Found Squashfs! Offset of squashfs: 1245184
Copying header with linux to extracted_header.bin
1245184+0 records in
1245184+0 records out
1245184 bytes (1.2 MB, 1.2 MiB) copied, 1.35345 s, 920 kB/s
Header has been written
Copying squashfs to extracted_squashfs
2424832+0 records in
2424832+0 records out
2424832 bytes (2.4 MB, 2.3 MiB) copied, 2.58828 s, 937 kB/s
Squashfs has been written
Unpacking Squashfs...
Parallel unsquashfs: Using 8 processors
555 inodes (384 blocks) to write
[======================================================================================|] 939/939 100%
created 367 files
created 78 directories
created 124 symlinks
created 64 devices
created 0 fifos
created 0 sockets
created 0 hardlinks
DONE! Now you can modify system in squashfs-root. Then run make repack
┌──(dany㉿kali)-[~/Downloads/TPLINK - XZ000-G3/tprepack-master]
└─$ make repack
sudo sh pack_firmware.sh
Packing firmware...Please wait
Parallel mksquashfs: Using 8 processors
Creating 4.0 filesystem on packed.squash, block size 131072.
[======================================================================================/] 384/384 100%
Exportable Squashfs 4.0 filesystem, lzma compressed, data block size 131072
compressed data, compressed metadata, compressed fragments,
compressed xattrs, compressed ids
duplicates are removed
Filesystem size 2367.76 Kbytes (2.31 Mbytes)
21.70% of uncompressed filesystem size (10912.75 Kbytes)
Inode table size 4328 bytes (4.23 Kbytes)
20.80% of uncompressed inode table size (20807 bytes)
Directory table size 5581 bytes (5.45 Kbytes)
44.78% of uncompressed directory table size (12464 bytes)
Number of duplicate files found 43
Number of inodes 633
Number of files 367
Number of fragments 33
Number of symbolic links 124
Number of device nodes 64
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 78
Number of hard-links 0
Number of ids (unique uids + gids) 2
Number of uids 2
root (0)
dany (1000)
Number of gids 2
root (0)
dany (1000)
Rootfs created as packed.squash
Firmware joined as output_firmware.bin
Generating footer...
Header Magic number: 0x32524448 found 0x32524448 ...ok
Header Magic device: 0x00000100 found 0x00000100 ...ok
tclinux.bin size: 3670016 (0x00380000) found 3670016 (0x00380000) ...ok
tclinux.bin checksum: 0x4E4C3FF5 found 0xEDC422DB ...failed
Checksum fixed. Creating footer...
TP Product ID: 0x4685b102 (1183166722)
TP Version: 2.0.0.1
TP Version in HEX: 0x2.0x0.0x0.0x1
Calculated CRC:8de2a1bb8da343ec98343a29553e766e output_firmware.bin
Done...Please double check size. If your file ends at lower 003800e8, then it's good
00380000 6f 6b 30 6f 77 70 61 6b 64 69 65 39 38 77 64 6b |ok0owpakdie98wdk|
00380010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
00380040 00 00 00 00 00 00 00 00 00 00 00 00 46 85 b1 02 |............F...|
00380050 02 00 00 01 03 01 04 00 00 00 00 00 00 00 00 00 |................|
00380060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
003800d0 00 00 00 00 8d e2 a1 bb 8d a3 43 ec 98 34 3a 29 |..........C..4:)|
003800e0 55 3e 76 6e 00 00 00 00 |U>vn....|
003800e8
All good! use result.bin to update device