diff --git a/Common.xsd b/Common.xsd
index 525a5f7..9e7cfb3 100644
--- a/Common.xsd
+++ b/Common.xsd
@@ -167,7 +167,6 @@ Note that if there are more than one street address, the model forces these to b
Does the site have, or can get broadband internet? Dial-up only probably won't work.
-
@@ -2057,43 +2056,6 @@ When used for site surveys, should include what types of equipment are envisione
-
-
- Describes what weather data to use in an analysis. Provides a means to specify a location and type of weather file dataset to use in an analysis.
-
-
-
-
- Describes the set of weather stations, or geographic cells used to specify the site's weather. Examples include: WBAN, WMO, NREL 40km Monthly Grid Cell, etc.
-
-
-
-
- The ID number used within the associated Station Category system. If the Station Category is "WBAN," then this element would contain the WBAN number for the desired station. For example, San Francisco, CA is WBAN "23234." And Cairo, Egypt is WMO "623660."
-
-
-
-
- Type of weather dataset, such as TMY, TMY2, IWEC, etc.
-
-
-
-
- Required for configuring inverter circuits. Of the monthly average high temperatures for the site, the highest one.
-
-
-
-
- Lowest historic temperature. Required for configuring PV inverter circuits. Used to find highest PV system string voltage when cold and sunny, and therefore longest possible string.
-
-
-
-
- Required for PV system structural validations. For CA permitting guidebook, speed must be less than 110mph. This is based from ASCE 7-10, risk category II for CA.
-
-
-
-
Used in YearIntervalDataDoubleType.
diff --git a/CommonSolar.xsd b/CommonSolar.xsd
index a7217f5..3511d48 100644
--- a/CommonSolar.xsd
+++ b/CommonSolar.xsd
@@ -1187,21 +1187,6 @@
-
-
-
-
- Expected highest temperature in degrees Celcius at the system's location. Used to evaluate equipment derating.
-
-
-
-
- Expected lowest temperature in degrees Celcius at the system's location. Used to evaluate maximum system output.
-
-
-
-
-
For a module layout, this defines any area within a given scene that may contain multiple roofFaces and groundAreas that modules cannot be placed. The coordinates used in this element apply to the whole scene of roofFaces and groundAreas where moduleLayouts are placed (may contain more than one area).
diff --git a/Project.xsd b/Project.xsd
index 3e96625..49c4b11 100644
--- a/Project.xsd
+++ b/Project.xsd
@@ -534,6 +534,7 @@ Included reference to Utility Service here instead of in Building since Project
The site element describes the property on which the project is being considered or implemented. It describes ownership and jurisdictional information, as well as physical attributes associated with the property and grounds.
+
@@ -682,4 +683,148 @@ The organization is consistent in many energy management systems and programable
+
+
+ Describes various design parameters for analysis and modeling.
+
+
+
+
+ A set of codes that this project must comply with.
+
+
+
+
+
+
+
+
+
+ A set of temperature datasets. Typically required for configuring inverter circuits.
+
+
+
+
+
+
+
+
+
+ A set of parameters relevant to structural design.
+
+
+
+
+
+
+
+
+
+
+
+
+
+ Wind exposure categories as defined in ASCE 7.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ Required for PV system structural validations. For CA permitting guidebook, speed must be less than 110mph. This is based from ASCE 7-10, risk category II for CA.
+
+
+
+
+
+
+
+
+
+
+
+ Defines code - a set of rules to comply with (e.g. California 2016 Fire Code)
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ A collection of temperature data points with metadata describing them.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+