结果分析中的3D图

[Zhling27]

Dear Professor.
I am a PhD student studying the numerical simulation of karst groundwater, and I have encountered some problems during the simulation process with pykasso.
1、In the process of running the third case of the examples you provided: Modelling the Tsanfleuron 3D network, in the seventh step, "3D plot", my model does not give the corresponding results, the following are my results.I didn't change any parameters during the process, and the results were generated in the output, and the results were also given in the front.

Below are the model file details:
https://1drv.ms/u/c/9a76ce4968840d61/EeJHmTiX7t1DjfG42-uFXMEBQM4cgFu6ypQN0LCAz4YVow?e=D59dmj
Also in my own model, the same thing happens, there is no way to get a 3D drawing.
Here are the relevant files for my model for reference:
https://1drv.ms/f/c/9a76ce4968840d61/EmjxQPN3JJxMl7AEUIN1G9YBxywhsegafXzyfpr4ImU6CQ?e=DImUrb
2, In the cases I see that there is only one outlet, if I want to set up more than one outlet in my study area, I would like to ask if the current code can do it, because after I set up more than one outlet it can only read the data of the last outlet and simulate it.
3、In the model of Case 3, it is mentioned that the 3D geological model, the list of possible inflow locations, and the statistical distribution of major faults and fracture families are constructed and assembled by Measday (2021), which can be of great help to my research, but I have searched for a lot of ways to obtain the relevant paper materials, can you provide me with the paper materials for reference, or provide me with access to the paper materials of Measday (2021).Can you provide me with information about the paper for reference, or provide me with a way to access the Measday (2021) paper.I promise that I will only use the information for my own academic research and will not distribute it in any way.
Good luck!
Looking forward to your reply!Thank you for your time.