Problem to on/off wifi

[ravsit-activum]

Since a few weeks scripts hasn't worked.
I suppose that is something with new firmware in router.
CH7465LG-NCIP-6.15.28-4p7-NOSH
Do You have any advise?

--- WAITING FOR ROUTER TO UPDATE ---
|███---------------------| 12%, 3sec [{'band_mode': '1 -> 3', 'radio_2g': {},
|██████------------------| 25%, 6sec}}] [{'band_mode': '1 -> 3', 'radio_2g': {},
|██████████--------------| 41%, 10sec}] [{'band_mode': '1 -> 3', 'radio_2g': {},
|█████████████-----------| 54%, 13sec}] [{'band_mode': '1 -> 3', 'radio_2g': {},
|████████████████--------| 66%, 16sec}] [{'band_mode': '1 -> 3', 'radio_2g': {},
|███████████████████-----| 79%, 19sec}] [{'band_mode': '1 -> 3', 'radio_2g': {},
|███████████████████████-| 95%, 23sec}] [{'band_mode': '1 -> 3', 'radio_2g': {},
|████████████████████████| 100%, 24sec] [{'band_mode': '1 -> 3', 'radio_2g': {}, 'radio_5g': {'bss_enable': '2 -> 1'}}]

--- CHANGES THAT DID NOT GET SET ---
{'band_mode': '1 -> 3', 'radio_2g': {}, 'radio_5g': {'bss_enable': '2 -> 1'}}

[frimtec]

Hi @ravsit-activum
I got the firmware update from CH7465LG-NCIP-6.12.18.26-3p4-GA-NOSH to CH7465LG-NCIP-6.15.28-4p8-NOSH yesterday as well.
I have realized that now all modification operations on the modem take much longer as before.
I have an own project compal-wifi-switch (using compal_CH7465LG_py as a library), a CLI application to switch on/off wifi including guest networks.
Since the firmware update it was not working anymore. What I recognize is, that commands can deadlock if modifications are done too quickly after each other.
Therefore I use a pause between modifications, and I had to increase this pause to 60s after the firmware update :-( But at least, it works stable again.
The new release 1.1.4 is now working again with the new firmware.
Hope this comment helps.