Bump prospector from 1.2.0 to 1.7.4

[dependabot]

Bumps prospector from 1.2.0 to 1.7.4.

Release notes

Sourced from prospector's releases.

1.7.4

Mea culpa release

Fix

The effort to allow pylint configuration in pyproject.toml to be used as an external config source (#485) had the unintended side effect where any project using poetry would now use that configuration and thus would ignore the pylint configuration in the profile. This was true even if the pyproject.toml had no pylint directives in it.

The behaviour has now been fixed where pylint will be configured using configuration from the profile first and then if any additional settings are found in a pylintrc or pyproject.toml or setup.cfg then these will override the profile configuration, instead of replacing it entirely.

This also has the benefit of fixing #227 .

1.7.1

Lots of smaller bugfixes in this release.

Fixes:

• Prospector now configures pylint using settings found in pyproject.toml or setup.cfg, not only .pylintrc - #485
• Fixed --no-style-warnings command line argument no longer warning after renaming pep8 to pycodestyle - #488
• Documentation is building again - #473
• --with-tool flag now respects - but overrides - tools disabled in profiles - #447
• Fixed crash with merging multiple import warnings - #477
• Fixed segfault when analysing code using cartopy - #403

1.7.0

This is mostly a "tidying up" release in preparation for more useful code refactoring and feature improvement.

New:

• Added a --quiet command line option to suppress all output. Useful if you just want to know the exit code of prospector for scripting.
• Removed the prospector "indent checker" since this is now no longer in pylint [#482](https://github.com/PyCQA/prospector/issues/482) <https://github.com/PyCQA/prospector/issues/482>_

Fixes:

Deprecation warning:

• Tools pep8 and pep257 have been renamed to pycodestyle and pydocstyle respectively. This is because the tools themselves were renamed years ago - See #222. Note that this means that prospector profiles and message output uses this new name instead of the old name, so you will need to update your configuration. The old names will still work, but this legacy behaviour will be removed in prospector 2.0
• There is now a --legacy-tool-names flag for outputting pep8 or pep257 as the tool name when outputting errors. This is to be backwards compatible with any parsing logic; this flag is also deprecated and will go away in prospector 2.0

Tidying up

These are all internal prospector code quality improvements.

• #467 - Removed nosetests, as nose is not compatible with Python 3.10 yet and the pytest tests were already doing the same thing
• Tidied up the tox testing
• Started adding some type hints to methods
• Fixed lots of warnings raised by prospector when running prospector on itself...
• Removed some old python2 compatibility code which is no longer needed now python2 is not supported at all
• Fixed hyperlink formatting in this CHANGELOG to be RST (was never updated after converting from markdown)

... (truncated)

Changelog

Sourced from prospector's changelog.

Version 1.7.4

Mea culpa release

Fix

The effort to allow pylint configuration in pyproject.toml to be used as an external config source (issue here PyCQA/prospector#485)`_ had the unintended side effect where any project using poetry would now use that configuration and thus would ignore the pylint configuration in the profile. This was true even if the pyproject.toml had no pylint directives in it.

The behaviour has now been fixed where pylint will be configured using configuration from the profile first and then if any additional settings are found in a pylintrc or pyproject.toml or setup.cfg then these will override the profile configuration, instead of replacing it entirely.

This also has the benefit of fixing [#277](https://github.com/PyCQA/prospector/issues/277) <https://github.com/PyCQA/prospector/issues/227>_.

Version 1.7.3

The war on bugs.

Fixes:

• Autodetect now does not die if a user does not have permissions (related to [#271](https://github.com/PyCQA/prospector/issues/271) <https://github.com/PyCQA/prospector/issues/271>_ and [#487](https://github.com/PyCQA/prospector/issues/487) <https://github.com/PyCQA/prospector/issues/487>_)
• Fixed that some pylint documentation warning messages were not correctly included in the list of documentation warnings to squash if doc warnings are not desired.
• Fixed the exit code for prospector - it was always 0 after the move to using poetry for packaging instead of 1 if errors were found (unless --zero-exit) was used. This now exits with the correct code based on the documented (and previous) behaviour.
• Fix that pep8 would overwrite instead of inherit from previous pycodestyle blocks, same with pep257 - [#491](https://github.com/PyCQA/prospector/issues/491) (comment) <https://github.com/PyCQA/prospector/issues/491#issuecomment-1053539711>_
• Fix the pre-commit hook, as it could not run without being installed [with_everything], due to the "NotAvailableTool" class not properly implementing the abstract base class.
• Improved documentation about the pre-commit hook as well to clarify its use better - [#484](https://github.com/PyCQA/prospector/issues/484) <https://github.com/PyCQA/prospector/issues/484>_

Version 1.7.2

More bugfixes!

Fixes:

• Fix that pep8 and pep257 sections were renamed but the old deprecated values were not properly used to configure pycodestyle and pydocstyle - [#491](https://github.com/PyCQA/prospector/issues/491) <https://github.com/PyCQA/prospector/issues/491>_
• Better handling for when the user running prospector is not able to read a file or directory - [#271](https://github.com/PyCQA/prospector/issues/271) <https://github.com/PyCQA/prospector/issues/271>_ and [#487](https://github.com/PyCQA/prospector/issues/487) <https://github.com/PyCQA/prospector/issues/487>_

Version 1.7.1

Lots of smaller bugfixes.

Fixes:

• Prospector now configures pylint using settings found in pyproject.toml or setup.cfg, not only .pylintrc - [#485](https://github.com/PyCQA/prospector/issues/485) <https://github.com/PyCQA/prospector/issues/485>_
• Fixed --no-style-warnings command line argument no longer warning after renaming pep8 to pycodestyle - [#488](https://github.com/PyCQA/prospector/issues/488) <https://github.com/PyCQA/prospector/issues/488>_
• Documentation is building again - [#473](https://github.com/PyCQA/prospector/issues/473) <https://github.com/PyCQA/prospector/issues/473>_
• --with-tool flag now respects - but overrides - tools disabled in profiles - [#447](https://github.com/PyCQA/prospector/issues/447) <https://github.com/PyCQA/prospector/issues/447>_

... (truncated)

Commits

• dbcd43c Fixing tests after change to how pylintrc config is loaded
• f1590d3 [Set the default IP address when debugging to localhost microsoft/vscode-python#227 #492] Fixing loading of external pylint configuration to append rather ...
• 9889095 Fixed RST in README as it was breaking PyPI parsing and was not able to be up...
• 4c1297a Bumping version for release
• 86e299d Updating changelog
• 89c7d07 Cleaning up documentation surrounding the pre-commit hook #484
• 46519ea Fixing up pre-commit configuration
• b29f373 Fix the pre-commit hook, as it could not run without being installed [with_ev...
• 523a871 Coveralls is a PITA with Github actions
• 0cb3110 Re-enabling coveralls
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[dependabot]

Superseded by #79.