A "port" of the M5Launcher (sort of) for the Tab5, with LVGL GUI.
You can select and load firmwares from the SD card (must be formatted in FAT32) and flash them into the device.
- Sometimes when flashing a firmware LVGL will run into errors rendering the progress bar so the UI freezes (The flashing process is still going though).
- The file manager is not working due to path issues
- The loaded firmware must not use the M5GFX/M5Unified library because if it uses M5GFX/M5Unified the device can't boot into the launcher again.
将 M5Launcher "移植"到Tab5设备上，使用LVGL实现GUI。
从SD卡中加载.bin格式的固件文件（SD卡必须使用FAT32文件系统）并将其烧录到设备，然后运行固件。
- 有时烧录固件时，LVGL会出错导致进度条（界面）停止重绘，但是固件烧录进程依然会正常工作。
- 文件管理器目前无法正常工作，因为默认路径不对。
- 加载的固件必须不使用 M5GFX/M5Unified 库，否则会导致设备不再重启到Launcher。
You can build using ESP-IDF, simply navigate to the project root and run idf.py build.
You should use the ESP-IDF shell in order to run idf.py commands.
Also, you can use your VS Code with the ESP-IDF Extension, simply open the project root directory in VS Code and the extension should automatically kick in.
你可以使用ESP-IDF编译本项目。在项目根目录下执行idf.py build即可。
为了使用idf.py指令，你需要使用ESP-IDF的PowerShell或者CMD。
你也可以使用VS Code的ESP-IDF插件。用VS Code打开本项目根目录，插件会自动帮你配置，只需在VS Code中执行指令即可。