JBL_Integration

This repository is a soundbars JBL_integration for a Home Assistant, this as a custom component.

This integration is only usable if you're also able to use the 'JBL one' app (https://play.google.com/store/apps/details?id=com.jbl.oneapp).

Features

• Read state of the soundbar
• Setting Volume
• Simulate button presses
• Setting EQ

Installation Instructions

Using HACS

1. Add this repository as a custom repository in HACS. Either by manually adding https://github.com/MrBearPresident/JBL_Soundbar with category integration or simply click the following button:

2. Search for "JBL_integration" in HACS and install the integration
3. Restart Home Assistant
4. Proceed to Setup instructions

Manual install

1. Download the custom_components/jbl_integration directory to your Home Assistant configuration directory
2. Restart Home Assistant
3. Proceed to Setup instructions

Setup Instructions

Automatic Setup

The integration will scann network devices through zeroconf and propose them to you.

Manual Setup

1. Go to the Integrations page
2. Search for "jbl_integration"
3. Through the UI, configure the ip address of the soundbar
4. Wait a few seconds, and the integration should be ready.

#Working Models

Firmware Version	24.15.21.80.00	24.xx.31.80.00
JBL Bar 300		Works With V1.2.0
JBL Bar 500
JBL Bar 700
JBL Bar 800	Works With V1.1.1d	Works With V1.2.0
JBL Bar 1000	Works With V1.1.1d	Works With V1.2.0
JBL Bar 1300		Works With V1.2.0
JBL Bar 1300X
JBL Authentics 500		Works With V1.2.0