Requirements:

• OS: This example was tested on Ubuntu 22.04.5 LTS and Windows 11
• Tools:
  • Xilinx Vivado 2024.2 or newer
  • Aldec Riviera-PRO 2024.10 or newer with preinstalled simulation libraries:
    • unisim
    • unisims_ver
    • unimacro_ver
    • secureip

Run the example in the following steps

1. Run Vivado
2. Make sure a proper path to Riviera-Pro simulator is selected in Tools > Settings > Tool Settings > 3rd Party Simulators
3. Make sure that Vivado environment is in the same directory as TOP_module.tcl file.
4. Source TOP_Module.tcl using Tools > Run Tcl Script...
5. Wait until the example project generation is complete
6. Run Simulation

Known Problems

• If the path to Riviera-PRO is not established. After Run Simulation is selected, the tcl console should print:

      ERROR: [USF-Riviera-PRO-35] Failed to locate '../rungui' executable in the shell environment 'PATH' variable. 
      Please source the settings script included with the installation and retry this operation again.
      ERROR: [Common 17-39] 'send_msg_id' failed due to earlier errors.
  

• If the path to BFM license is incorrect, the Riviera-Pro console should print:

      ELAB2: Warning: ELAB2_0113 Task or function "$check_license" not defined in module "Ax_Axi4MasterBFMcore"
      from library "xil_defaultlib"
  

  Make sure the correct path is given in -pli switch in box riviera.simulate.asim.more_options in Vivado Simulation Settings.
  The path should be established as follows:

  -pli libAxiBfmPliRiv