A simple clock divider based on HAGIWO's design.
Project sponsored by PCBWay.
See my full docs on my website: https://benjiaomodular.com/post/2024-11-22-minidiv-pcb/
- To address LED clearance issues, I moved the LEDs to be mounted to the back, facing down, such that the LED shines through a hole on the board.
- First working version
- ISSUE: The LEDs were preventing the jacks from going in completly. The module still works but it might cause problems in the future.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
