Voltera measuring board

is based on the IViny Compact Data Acquisition Device

IViny is easy to use and USB based simple low-cost DAQ and measurement device for data acquisition application. It can be used quickly without any low level electronically knowledge.

• 2 channels 0 – 5V and 0 – 3V digital input/output
• 2 channels 0 – 5V 10 bit analog input
• Channel maximum current 20 mA
• ATTiny85 based
• USB supply, no need external supply
• V-USB based communication
• PC user interface
• 150 S/s (it will increase with future next firmware upgrade still under development)
• 50 mm x 33 mm x 17 mm
• http://www.ivmech.com

If you interest to have one, feel free to contact us, caner@ivmech.com

Also it is ATTiny85 based and uses V-USB communication, therefore it is low-cost and open source...

IViny Scope

=====

https://github.com/ivmech/iviny-scope

IViny, can be controlled by user interface from computer. Digital input/output channels are available to read and write.

IViny also has simple scope screen that can be used easy and quickly shows 2 channels analog input measurement simultaneously. Also there is option to save measurements into computer.

Last measurements or saved measurements can be viewed easily.

IViny Arduino

=====

https://github.com/ivmech/iviny-arduino

Also firmware can be written by using IViny Arduino software. It uses arduino-tiny backend, therefore it is available with programming any arduino-tiny sketches over USB by micronucleus firmware.

http://www.ivmech.com