ACS_Project_MPZ

Authors (team): Пелех Богдан, Михасюта Максим, Журба Федір

LaTex report

Description

Final iteration.

What we have done:

• Mesh via WiFI
• RF24 communication
• WiFi connection to local server
• Local web server

Prerequisites

Hardware:

• NODEMCU
• ARDUINO
• NRF24L01
• NRF24L01 breakout board
• DHT11

Software:

• Arduino IDE ready to work with ESP8266

Installation

Clone the project

git clone https://github.com/maxmyk/ACS_Project_MPZ
cd ACS_Project_MPZ

Usage

Upload code to corresponding microcontrollers Change WiFi SSID and PASSWORD at WIFI_PASS.h files

1-st level (Sensors)

Transmitter, Transmitter2: upload to Arduino Nano or Uno. We do not guarantee it'll work at other models. Then connect as shown here

2-nd level (Mesh)

ESP_mesh: upload to NodeMCU and connect as shown here

3-rd level (HUB)

Bridge: upload to NodeMCU Hub: upload to NodeMCU Connection:

Bridge	Hub
Gnd	Gnd
D5	D6
D6	D5

Important! WiFi you are connecting to should be on channel 1

Important!

• There may be some trouble connecting NRF24L01!
• Some NodeMCUs require specific drivers and may not work right away
• Make sure to use proper bootloader settings when uploading the code
• Check the wiring at least twice, most of the problems are at this step