Boa³², my second attempt at RISC-V

Boa32 is a microcontroller-sized pipelined RISC-V CPU currently supporting up to RV32IMC_Zicsr_Zifencei. It is a personal learning project in my aspirations to become a CPU designer/engineer.

This core is decently compact for its features: when implemented on an Artix-7 15T (with some MMIO peripherals), it consumes merely 4900 LUTs and 2600 FFs.

History

Because my previous RISC-V CPU, Axo32, successfully ran code but had crippling issues with the memory architecture, I decided to start my second generation early.

Boa32 is my second attempt at RISC-V, with a longer pipeline and simpler memory bus than Axo32 has. It initially had the same features (RV32IM_Zicsr) but I'm expanding the scope (to RV32IMAC_Zicsr_Zifencei) to implement more RISC-V features.

Specifications for CPU nerds

The current version of Boa32 implements up to RV32IMC_Zicsr:

Instruction set	Meaning
RV32I	Base instruction set for 32-bit RISC-V
M	Multiply and division instructions
C	Compressed instruction set
Zicsr	Control and status register instructions
Zifencei	Instruction-fetch fence

With the following CSRs present, all mandatory:

CSR address	CSR name	Default value	Features
0x300	mstatus	0x0000_0000	MIE and MPIE bits
0x301	misa	0x4000_1104	Read-only query of ISA (RV32IMC)
0x302	medeleg	0x0000_0000	(unimplemented)
0x303	mideleg	0x0000_0000	(unimplemented)
0x304	mie	0x0000_0000	Read/write any interrupt enable
0x305	mtvec	0x0000_0000	Read/write direct exception vector
0x310	mstatush	0x0000_0000	(unimplemented)
0x344	mip	0x0000_0000	Read-only query of pending interrupts
0x340	mscratch	0x0000_0000	Read/write any value
0x341	mepc	0x0000_0000	Read/write any legal PC
0x342	mcause	0x0000_0000	WARL trap and exception cause
0x343	mtval	0x0000_0000	(unimplemented)
0xf11	mvendorid	0x0000_0000	(unimplemented)
0xf12	marchid	37	Serves as attribution for tapeouts and FPGA bitstreams
0xf13	mimpid	0x0000_0000	Helps distinguish between different versions and parametrizations
0xf14	mhartid	parameter	Read-only query of CPU/HART ID
0xf15	mconfigptr	0x0000_0000	(unimplemented)

Unsupported features on the TODO list:

• Fusion of division and modulo by means of a cache
• More configurability
• Dynamic branch prediction
• A extension
• U-mode

How to interpret mimpid

I use the mimpid CSR to encode the version and implementation details not encodable by standard RISC-V means.

The following bits op mimpid are allocated:

Bits	Name	Default value	Description
[3:0]	PATCH	Current version	Semantic versioning PATCH number
[7:4]	MINOR	Current version	Semantic versioning MINOR number
[15:8]	MAJOR	Current version	Semantic versioning MAJOR number
[31]	FORK	0	Recommended way to distinguish between official releases and fork releases of Boa-RISC-V
Other bits of mimpid are currently reserved for future use and should be 0 until allocated.

Parameters encodable by standard means include:

• Maximum supported ISA (value of misa at reset)
• Minimum supported ISA (value of misa after writing 0)
• Supported interrup vectoring modes (possible values of mtvec)
• CPU index (value of mhartid)

Parameters not encodable by CSRs include:

• Entrypoint address
• CPU-local MMIO address

Fixed propertied of the CPU include:

• Extensions not covered in misa (Zicsr and Zifencei)
• Address bus width (32)
• Data bus width (32)
• Multiplier latency (0)

License

Copyright © 2024, Julian Scheffers

This work ("Boa³²") is licensed under Creative Commons Attribution 4.0 International

If you create an FPGA bitstream, a compiled simulation, a tapeout or other compiled design with a Boa-RISC-V core, the marchid CSR is all the necessary attribution. For this, the value of marchid must not be changed and it must be readable by software running in M-mode. It is recommended that any third-party releases of a modified Boa-RISC-V CPU set the highest bit of mimpid to 1 to distinguish from official releases.